Replacement Part List

OPERATION INSTRUCTIONS__________________________________________________________________________

1. Place the pump in the desired fountain and connect (from fountain)

tubing to the outlet of the pump. Fig. 1

NOTE: The pump must be completely submerged for proper operation

and cooling. The pump has an auto shut off feature that detects when

the water level is low.

Fig.1

2. Connect the pump to the transformer. Screw on the locking nut. Fig. 2

Fig.2

3. Plug the transformer into a properly grounded electrical outlet.

Fig. 3

Fig.3

CARE AND MAINTENANCE_______________________

 Regularly clean the two electrodes to keep the pump in good working condition (see Fig. 4).

 Clean the product periodically to prevent mineral deposits and contamination. Be sure to use biodegradable

soap.

 Disconnect the power and empty the basin if fountain will not be used for an extended time.

 If installed outdoors and in freeze-area of the country, ensure all water is removed and the unit is completely

dry.

 Product is Not to be Operated Below 41°F (5°C), Freeze Damage May occur.

Fig.4