User manual

7 Error Messages

Overview of IPDS NACK’s that can be returned to the system.

7.1 Supported IPDS NACK's:

Command Reject Exceptions

0x800100: Invalid IPDS Command Code

0x800200: Invalid IPDS Command Sequence

0x800400: Data received after ARQ

0x80E000: Invalid IPDS Command Length

Equipment check with intervention-Required Exception

(MPI Tech LinkCom/HostCom only)

0x501000: Printer hardware exception

0x50F200: Print overrun

0x50F500: Image generator exception

0x50F600: Offset stacker exception

0x50F700: Duplex media source exception

0x50F800: Input media source exception

Intervention-Required Exceptions

0x400000: Printer Not Ready

0x400100: Printer Out of Paper

0x400200: Printer exit tray full

0x400400: Printer out of toner

0x400500: Empty fuser oil supply

0x400600: Invalid media

0x403100: Paper length check

0x403300: Paper width check

0x40E000: Paper jam not cleared

0x40E100: Out of paper (secondary input)

0x40E200: Transport requires corrective action

0x40E300: Fuser requires corrective action

0x40E500: Paper jam recovery needed

0x40E600: Door open

0x40E700: Paper specification check

Equipment check exception

0x10F100: Permanent hardware exception

0x10F200: Print overrun

0x10F300: Magnet settings changed

0x10F400: Serializer parity exception

0x10F500: Image generator exception

0x10FA00: Media size sensor error

Data-Check Exceptions

0x082100: Undefined Character

0x082900: Double-byte coded font section is not activated or is invalid