User`s guide

Administering Multipathing DevicesThrough
mpathadm Commands
You determine and congure Solaris OS multipathing support by using mpathadm commands.
Starting with the Solaris 10 Update 3 OS, the mpathadm command enables multipathing
administration through the ANSI standard Multipath Management API. The terms used in this
chapter to denote a path, initiator port, target port, and logical unit are consistent with the T10
specication.
Administering Multipathing Devices
Perform the following tasks to administer any multipathing devices.
▼
To Get a List of Multipathing Support That Can Be
Administered by the mpathadm Command
The multipathing support is identied with the Multipath Management API plug-in library
name.
List the multipathing support by typing the mpathadm list mpath-support command.
# mpathadm list mpath-support
mpath-support: libmpscsi_vhci.so
(Only one result is shown in the preceding example.)
▼
To Get the Multipathing Support Properties
The multipathing support properties are associated with Multipath Management API plug-in
properties.
3
CHAPTER 3
●
25