User`s guide

▼
To Get a List of Initiator Ports Discovered on the
System
An initiator port is part of a path that consists of an initiator port, target port, and a logical unit.
Run the mpathadm list initiator-port command.
# mpathadm list initiator-port
Initiator-Port: iqn.1986-03.com.sun:01:080020b7ac2b.437a3b3e,4000002affff
Initiator-Port: 2000000173018713
▼
To Get the Properties of a Particular Initiator Port
Display the properties of an initiator port by typing the show command.
Run the mpathadm list initiator-port command.
# mpathadm list initiator-port
Initiator-Port: iqn.1986-03.com.sun:01:080020b7ac2b.437a3b3e,4000002affff
Initiator-Port: 2000000173018713
Select an initiator port to use from the output.
Run the mpathadm show initiator-port initiator-port-name command.
# mpathadm show initiator-port 2000000173018713
initiator-port: 2000000173018713
Transport Type: Fibre Channel
OS Device File: /devices/pci@1f,2000/SUNW,glc@4/fp@0,0
▼
To Get a List of Logical Units Discovered on the System
The mpathadm list lu command displays the list of logical units attached to the initiator. This
list displays the number of paths and the operational path count to each logical unit listed.
Run the mpathadm list lu command.
# mpathadm list lu
/dev/rdsk/c4t60020F20000035AF4267CCCB0002CEE2d0s2
Total Path Count: 2
Operational Path Count: 2
/dev/rdsk/c4t60003BA27D2120004204AC2B000DAB00d0s2
Total Path Count: 2
●
1
2
3
●
Administering Multipathing Devices
Chapter 3 • Administering Multipathing Devices Through mpathadm Commands 27