User`s guide

Operational Path Count: 2
/dev/rdsk/c4t60003BA27D2120004204AC1A000F1D6Cd0s2
Total Path Count: 2
Operational Path Count: 2
▼
To Get the Properties and Associated Path Information
of a Particular Logical Unit by Name
Display the list of logical units, along with the properties for each logical unit through the
mpathadm command. The list of logical units contains logical unit names that in turn can be
used to display the properties of a particular logical unit.
Run the mpathadm list lu command.
# mpathadm list lu
/dev/rdsk/c4t60020F20000035AF4267CCCB0002CEE2d0s2
Total Path Count: 2
Operational Path Count: 2
/dev/rdsk/c4t60003BA27D2120004204AC2B000DAB00d0s2
Total Path Count: 2
Operational Path Count: 2
/dev/rdsk/c4t60003BA27D2120004204AC1A000F1D6Cd0s2
Total Path Count: 2
Operational Path Count: 2
Select a logical unit name from the output.
Run the mpathadm show lu logical-unit-name command.
# mpathadm show lu /dev/rdsk/c4t60003BA27D2120004204AC2B000DAB00d0s2
logical unit: /dev/rdsk/c4t60003BA27D2120004204AC2B000DAB00d0s2
mpath-support libmpscsi_vhci.so
Vendor: SUN
Product: T4
Revision: 0301
Name Type: SCSI Inquiry VPD page 83 type 3
Name: 60003ba27d2120004204ac2b000dab00
Asymmetric: yes
Current Load Balance: round-robin
Logical Unit Group ID: NA
Auto Failback: on
Auto Probing: NA
Paths:
Initiator Port Name: 2000000173818713
1
2
3
Administering Multipathing Devices
Solaris SAN Conguration and Multipathing Guide • April 200928