User`s guide

Target Port Name: 20030003ba27d212
Override Path: NA
Path State: OK
Disabled: no
Initiator Port Name: 2000000173018713
Target Port Name: 20030003ba27d095
Override path: NA
Path State: OK
Disabled: no
Target Port Groups:
ID: 2
Explicit Failover: yes
Access State: standby
Target Ports:
Name: 20030003ba27d212
Relative ID: 0
ID: 5
Explicit Failover: yes
Access State: active
Target Ports:
Name: 20030003ba27d095
Relative ID: 0
▼
To List All Logical Units AssociatedWith a Particular
Target Port
To list paths through a target port use the show command of a logical unit. First, retrieve the list
of target ports associated with a logical unit. Then, use the target port to list all logical units
associated with this target port.
Run the mpathadm list lu command.
# mpathadm list lu
/dev/rdsk/c4t60020F20000035AF4267CCCB0002CEE2d0s2
Total Path Count: 2
Operational Path Count: 2
/dev/rdsk/c4t60003BA27D2120004204AC2B000DAB00d0s2
Total Path Count: 2
Operational Path Count: 2
/dev/rdsk/c4t60003BA27D2120004204AC1A000F1D6Cd0s2
Total Path Count: 2
Operational Path Count: 2
1
Administering Multipathing Devices
Chapter 3 • Administering Multipathing Devices Through mpathadm Commands 29