User`s guide
Select a logical unit name from the output.
Run the mpathadm show lu command.
# mpathadm show lu /dev/rdsk/c4t60003BA27D2120004204AC2B000DAB00d0s2
logical unit: /dev/rdsk/c4t60003BA27D2120004204AC2B000DAB00d0s2
mpath-support libmpscsi_vhci.so
Vendor: SUN
Product: T4
Revision: 0301
Name Type: SCSI Inquiry VPD page 83 type 3
Name: 60003ba27d2120004204ac2b000dab00
Asymmetric: yes
Current Load Balance: round-robin
Logical Unit Group ID: NA
Auto Failback: on
Auto Probing: NA
Paths:
Initiator Port Name: 2000000173818713
Target Port Name: 20030003ba27d212
Override Path: NA
Path State: OK
Disabled: no
Initiator Port Name: 2000000173018713
Target Port Name: 20030003ba27d095
Override path: NA
Path State: OK
Disabled: no
Target Port Groups:
ID: 2
Explicit Failover: yes
Access State: standby
Target Ports:
Name: 20030003ba27d212
Relative ID: 0
ID: 5
Explicit Failover: yes
Access State: active
Target Ports:
Name: 20030003ba27d095
Relative ID: 0
Select a target port from the output list.
2
3
4
Administering Multipathing Devices
Solaris SAN Conguration and Multipathing Guide • April 200930