User`s guide
▼
To Congure Multiple DevicesWithout Multipathing
Make sure you rst identify the devices visible to the host with the procedure “Ensuring That
LUN Level Information Is Visible” on page 81
. This procedure describes how to congure all
uncongured fabric devices that are attached to a fabric-connected host port. The port used as
an example is c0.
Loginasroot(su - root).
Identify the devices to be congured.
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 fc-fabric connected unconfigured unknown
c0::50020f2300006077 disk connected unconfigured unknown
c0::50020f23000063a9 disk connected unconfigured unknown
c0::50020f2300005f24 disk connected unconfigured unknown
c0::50020f2300006107 disk connected unconfigured unknown
c1 fc-private connected configured unknown
c1::220203708b69c32b disk connected configured unknown
c1::220203708ba7d832 disk connected configured unknown
c1::220203708b8d45f2 disk connected configured unknown
c1::220203708b9b20b2 disk connected configured unknown
Congure all of the uncongured devices on the selected port.
# cfgadm -c configure c0
Note – This operation repeats the configure operation of an individual device for all the devices
on c0. This can be time consuming if the number of devices on c0 is large.
Verify that all devices on c0 are congured.
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 fc-fabric connected configured unknown
c0::50020f2300006077 disk connected configured unknown
c0::50020f23000063a9 disk connected configured unknown
c0::50020f2300005f24 disk connected configured unknown
c0::50020f2300006107 disk connected configured unknown
c1 fc-private connected configured unknown
c1::220203708b69c32b disk connected configured unknown
c1::220203708ba7d832 disk connected configured unknown
c1::220203708b8d45f2 disk connected configured unknown
c1::220203708b9b20b2 disk connected configured unknown
1
2
3
4
Conguring Device Nodes Without Multipathing Enabled
Solaris SAN Conguration and Multipathing Guide • April 200984