User`s guide

Use the show_SCSI_LUN command to display FCP SCSI LUN information for multi-LUN SCSI
devices.
The following code example shows that the physical devices represented by
c0::50020f2300006077 and c0::50020f2300006107 each have four LUNs congured. The
physical devices represented by c0::50020f23000063a9 and c0::50020f2300005f24 each have
two LUNs congured.
# cfgadm -al -o show_SCSI_LUN c0
Ap_Id Type Receptacle Occupant Condition
c0 fc-fabric connected configured unknown
c0::50020f2300006077,0 disk connected configured unknown
c0::50020f2300006077,1 disk connected configured unknown
c0::50020f2300006077,2 disk connected configured unknown
c0::50020f2300006077,3 disk connected configured unknown
c0::50020f23000063a9,0 disk connected configured unknown
c0::50020f23000063a9,1 disk connected configured unknown
c0::50020f2300005f24,0 disk connected configured unknown
c0::50020f2300005f24,1 disk connected configured unknown
c0::50020f2300006107,0 disk connected configured unknown
c0::50020f2300006107,1 disk connected configured unknown
c0::50020f2300006107,2 disk connected configured unknown
c0::50020f2300006107,3 disk connected configured unknown
Conguring Device Nodes With Solaris Multipathing Software
Enabled
This section describes how to perform fabric device conguration steps on a host that has the
multipathing software enabled.
The devices attached to the fabric-connected host port are not congured by default and so are
not available to the host using the Solaris 10 OS. Use the cfgadm configure and cfgadm
unconfigure commands to manage device node creation for fabric devices. See the
cfgadm_fp(1M) man page for additional information. The procedures in this section illustrate
steps to detect fabric devices that are visible on a host and to congure them as multipathing
devices to make them available to the host using the Solaris 10 OS.
The device information that you supply, and that is displayed by the cfgadm(1M) command,
depends on your system conguration. For more information on the cfgadm command, see the
cfgadm_fp(1M) and cfgadm(1M) man pages.
5
Conguring Device Nodes With Solaris Multipathing Software Enabled
Appendix A • Manual Conguration for Fabric-Connected Devices 85