User`s guide
Identify the devices to be uncongured.
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 fc-fabric connected configured unknown
c0::50020f2300006077 disk connected configured unknown
c0::50020f23000063a9 disk connected configured unknown
c1 fc-private connected configured unknown
c1::220203708b69c32b disk connected configured unknown
c1::220203708b9b20b2 disk connected configured unknown
c2 fc-fabric connected configured unknown
c2::50020f2300005f24 disk connected configured unknown
Uncongure all of the congured devices on the selected port.
# cfgadm -c unconfigure c2
Note – This operation repeats the unconfigure command of an individual device for all devices
on c2. This process can be time-consuming if the number of devices on c2 is large.
Verify that all devices on c2 are uncongured.
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 fc-fabric connected configured unknown
c0::50020f2300006077 disk connected configured unknown
c1 fc-private connected configured unknown
c1::220203708b69c32b disk connected configured unknown
c1::220203708ba7d832 disk connected configured unknown
c2 fc-fabric connected unconfigured unknown
c2::50020f2300005f24 disk connected unconfigured unknown
c2::50020f2300006107 disk connected unconfigured unknown
Notice that the Occupant column lists c2 and all the devices attached to c2 as unconfigured.
2
3
4
Unconguring Fabric Devices
Solaris SAN Conguration and Multipathing Guide • April 200994