Operation Manual

LOCATION OF CONTROLS
1
CD Compartment
12
LCD Display
2
Speakers
13
USB Port
3
SKIP+ Button
14
BAND Switch
4
SKIP− Button
15
FUNCTION Switch
5
REPEAT Button
16
TUNING Control
6
PROGRAM Button
17
VOLUME Control
7
FOLDER DN Button
18
AC Socket
8
FOLDER UP Button
19
Antenna
9
STOP Button
20
Aux-In Jack
10
PLAY/PAUSE Button
21
Battery Compartment
11
Power Indicator
AC OPERATION
Connect the plug to the AC socket of the unit and the other end to a standard AC outlet.
ATTENTION
1. Do not plug or unplug the power cable while you have wet hands.
2. When planning not to use this unit for a long time, disconnect the power cable from
the wall outlet.
3. When disconnecting the power cord from the wall outlet, do not pull on the cord in
order to avoid shock risks caused by damaged cable.
BATTERY OPERATION
Disconnect the AC cord set completely. Open the battery compartment door and insert
6 pieces UM-2 "C" size batteries into the battery compartment with battery polarity as
shown inside the battery compartment.
- EN2 -
Warning:
When the unit will not be used for a long time, remove the batteries from the battery
compartment in order to prevent damage due to electrolyte leakage.
RADIO OPERATION
1. Slide the FUNCTION switch to RADIO/AUX position.
2. Slide the BAND switch to AM or FM position.
3. Turn the TUNING control to your desired radio station.
4. Adjust the sound level by rotating the VOLUME control
ANTENNA
For best reception, fully extend the FM Antenna to receive FM stations. For AM
reception, the unit has a built-in antenna, turn the whole unit for best reception.
CD OPERATION
1. Set the FUNCTION switch to CD position.
2. Insert a CD disc in the CD compartment and close the CD door, the unit will start
reading the disc, it will show the total number of tracks of the entire disc after
reading.
3. Press the PLAY/PAUSE button to start playing the disc.
4. During playing, press the PLAY/PAUSE button to temporarily pause playing. To
resume, press the PLAY/PAUSE button again.
Note : This unit only support audio CD disc (.cda format) playback.
USB OPERATION
PLAYING MP3 files with USB Port
1. Set the FUNCTION switch to USB position.
2. Plug your USB device into the USB port on the unit, the unit will start reading the
files in the USB device, it will show the total number of MP3 files in the device after
reading and start playing the first MP3 files in the USB device..
3. Press the FOLDER UP button to go to the next folder or FOLDER DN button to go
back to the previous folder.
4. During playing, press the PLAY/PAUSE button to temporarily pause playing. To
resume, press the PLAY/PAUSE button again.
- EN3 -