Operation Manual

Afterwards, input pairing password or PIN code ”0000” and click ”yes” or “confirm”, the headphone
will connect with your Bluetooth device successfully.
※The headphone will enter in power-on mode if releasing power button before red and blue LED
light glitters in turn. In this case, please turn off the power and operate it once again.
Answering calls: Press the power button once to answer the incoming calls.
Dialing calls: If the headset is paired with the cell phone, dialing the numbers on the cell phone will
enable the conversation on the headset automatically.
Ending calls: Ongoing conversation on cell phone can be ended by pressing the power key once. .
Redial latest number: The cell phone will automatically dial the last dialed phone number by
double pressing power key on the Bluetooth headset. We can hear the prompt tone from the headset.
Volume control: In the state of music or calls, move toggle switch upwards to increase the sound
and move it downwards to decrease the sound.
Previous /Next: Move the toggle switch upwards and hole it for a short while to come to previous
song, then move the toggle switch downwards and hold it for a short while to come to next song.
Pause /Play: Press the three-way button down to pause or play the music.
Wired headphone Function
The headphone can be used as the wired headphone. Just simply attach 3.5mm audio cable.
In the state of power off: It can be used as the wired stereo headphone by inserting the 3.5mm
audio cable. Please adjust the volume of sound sources when it is as the wired headphone. In this
case, the volume control of the headphone can' t be workable.
■Symbol of LED Light ：
Charging--- The red light is on. The red light will be off when it is full of power after charging.
Standby----blue light quickly glitters once per 5 seconds
Conversation/ Music---blue light glitters once per 5 seconds
Power Shortage---red light glitters (with Prompt tone)
Pairing---red and blue light glitters in turn
This is to certify that RPS680 is in conformity with:
Council directive 89/336/EEC (EMC direction):
Applicable standards:
EN55013:2001+A1:2003+A2:2006