Instruction Manual




GettingStarted

InsertingMemoryCard
TheReadersupportsSD/SDHC/MMCcard.ToinsertaMemorycard:
• OpentheSDcover.
• Check thatthe SD card is inthe correct positionwith the contact
pinfacingupwardsasillustratedbelow.Youmaydamagethecard
andthereaderifSDcardisnotinsertedincorrectposition.






• PushtheSDcardintothecardslot untilitclicks.
• ToremoveSDcard,pushtheSDcardonceagainuntilitclicks.
• When a SDcard is inserted in or ejected from the reader, it may
takefewsecondsforthereadertoupdatethecontent.
• PleaseavoidinsertingSDcardwhenotheroperationisrunningas
thismaycausethesystemhang.
• Should the system hang during operation, press and hold the
<Power>buttonfor6secondstoresetandturnitoff.












