For Model No.
This manual contains important safety precautions and information of correct use. Please be sure to read this manual carefully before use so as to avoid any accidents. Do not place the product in hot, wet or dusty environment, especially in summer, do not leave the product inside a car with all windows closed. Avoid dropping, impacting or shaking the product violently, otherwise it may cause damages or malfunctions. Select a proper volume to avoid ear problem when using earphones.
Hardware specification Software specification 7.0” High Definition TFT LCD Touch Screen (800x480 pixel) Capacitive multi-touch (5 touch) point function CPU: ARM cortex A8 processor RAM : DDR3 512MB (3D accelerator possible for 3D games) Wi-Fi (IEEE802.11 b/g/n) for internet connection USB host for OTG function G-sensor Micro SD card slot recognizing up to 32GB Built-in speaker & Built-in MIC 5V DC power adapter Compatible with keyboard, mouse Dimension : 119 x 189 x 10.5mm Andriod 4.
Name Speaker Camera(front) Volume - Volume + Earphone Charger MicroSD Page 3 USB Power
Instruction Important Notice - If the device is freezing or stuck, press the reset button(a small hole) or long press power button for 7 seconds. - When the performance is slow after using some applications, it is recommended to close running application in setting menu. Caution - For charging, be sure to use the power adapter(DC5V) that is provided in the package, otherwise, the device may be damaged and does not work. - The device is equipped with high performance processor.
1. Power On/Off Long press power button to turn on/off the device. It may take a minute to boot the device. Short press power button to turn on/off the screen.(Standby mode. Refer to 3. below) 2.
3. Standby mode(Screen off mode) / Unlock the screen Short press the power button to turn on/off the screen (standby mode on/off). After standby mode off, slide the lock icon in order to unlock the screen.
4. System settings On the desktop, press menu button and select system settings.
Press system settings 1. Wireless & networks 2. Sound Wi-Fi – Press Wi-Fi to turn on/off Wi-Fi settings - Press Wi-Fi settings, then the device will automatically search the available Wi-Fi signals. Select the network you want to connect with. Set up each setting as you like.
3. Display 4. Storage Set up each setting as you like. Check device memory and microSD card status. Unmount SD card – Unmount the SD card for safe removal.
5. Battery 6. Apps Check battery usage status. Manage downloaded or running applications. Downloaded All installed application are listing.
Keep pressing an application to manage. Press Uninstall to uninstall the selected application. Page 11 Running services View and control currently running services.
7. Account & sync Create your account. After connecting Wi-Fi network, the e-mailing system synchronizes your account with the device. Emails are automatically downloaded into the device. 8.
9. Security Screen lock – Protect your device from unauthorized use by creating a personal screen unlock pattern Make passwords visible – Show password as you type. Unknown sources - If you want to allow installation of non-Market Applications, Press Unknown sources and presses OK. Install from SD card – Install encrypted certificates from SD card.
10. Language & input Language – Choose your preferable language. Keyboard & input method – Change keyboard & keyboard settings. On Language & input settings, if you need other languages besides English on keyboard, press the relevant keyboard and enter the chosen Keyboard settings, select Keyboards, press the language you need.
11. Date & time Set date & time and format 12. Developer options Set options for application development 13.
How to connect/disconnect the device with/from the computer On main desktop, connect the device with the PC, touch right side of the status bar on the bottom of desktop Page 16
Press “USB connected”, select “Turn on USB storage”. The device is recognized at Explorer of the computer. Now you can use it as an external storage. After finishing your work, Press “Turn off USB storage” to unmount it.
How to install Applications(.apk file) into the device Method 1. 1. Connect the device with internet. See above [1.Wireless & networks] in order to connect internet. 2. Run “GetJar” and search the applications you want to install. 3. Follow the instruction on the screen for installation. Method 2. 1. With your computer, search application file(.apk) that you want to install into the device. 2. Download the file(.apk) into your computer. 3. Connect the device with your computer.
How to make desktop icons Press the upper right side icon of desktop, the pop-up displays.
Shortcuts Long press your desired APK icon and put it on the desktop. Widgets Long press your desired wiget icon and put it on the desktop. Wallpaper Long press the desktop, press Wallpapers and select one of categories of wallpaper. Select one you desire and press Set wallpaper.
Change Input Method If your device was installed with other more input method, long press setting icon of keyboard, and the pop-up displays. Select the installed keyboard, then the keyboard will appear with your desired language you installed.
Specification OS CPU SDRAM Display Multi-touch screen Built-in flash memory IO PORTS Speaker G-sensor Camera Wi-Fi Power Battery Dimension Charging time Page 22 Audio port USB port DC port HDMI port Micro SD OTG port Button by charger Android 4.0 ICS ARM cortex A8 processor DDR3 512MB (3D accelerator possible for 4D games) 7" TFT 800*480 Capacitive touch panel Yes : 5 point multi-touch 2 / 4 / 8 / 16GB 3.
For more information please check our website www.mpmaneurope.
