Quick Start Guide

Charging the Tablet
The tablet comes with a built-in rechargeable lithium-polymer battery.
Before using the tablet, the battery should be charged fully. The Status Indicator will light blue when the battery is charged
fully.
To charge the battery:
Plug one end of the included power adapter into an AC 100-240V outlet.
Plug the other end of the included power adapter into the Power jack on the tablet.
Disconnect the power adapter when the tablet is fully charged.
The battery used in this device may present a fire or chemical burn if mistreated. Do not disassemble, incinerate, or
heat the device. Do not leave the de-vice in a place subject to direct sunlight, or in a car with its windows closed.
Do not connect the device to a power source other than that which is indicated here or on the label as this may
result in the risk of fire or electric shock.
Inserting a Memory Card
The tablet accepts microSDHC memory cards. Insert a memory card into the microSDHC card slot to:
Increase the memory capacity of your tablet
Play media files stored on the memory card (e.g., music, video, or photo files).
To insert a memory card:
Align the memory card with the card slot. The metal contacts of the memory card should face down away from the LCD
screen.
Slide the card into the spring-loaded slot. Push the card in until it clicks into place.
Do not attempt to insert objects other than a microSDHC memory card into the card slot. A compatible memory
card should fit easily into the card slot; if you encounter resistance, check the alignment of the card. Do not attempt
to force the card in.
Avoid touching the gold contacts of the memory card.
To release and remove a memory card:
UNMOUNT the memory card.
a. From the home screen, tap the
Launcher Tab
, and then touch
Settings
to show the settings menu.
b. Touch
Storage
to show the storage settings.
c. Touch
Unmount SD card
to prepare the memory card for safe removal.