Instruction Manual

MP3 PLAYER
24
Polish, Russian, Turkish, Hungarian, Romanian, Arabic, Hebrew, Thai, Indonesian, and Greek.
3. Power off Setup
Power Saving Mode: The player will turn off automatically without any operation within the time. Setup
Range: 0~200 seconds. Setup Step: 10 seconds. The Power Saving Mode will be invalid in the following modes:
USB Connecting, Audio and Video Display, Recording, FM connecting, Picture and E-book Display.
Sleep Auto off Mode: The user can set a countdown (minute), allowing the player shut down automatically
when the time is up. Setup Range: 0~120 minutes. Setup Step: 10 minutes. The Sleep Auto off Mode will be
valid in other modes than the USB Connecting.
4. Memory Status: Show the percentage of the total memory space and the used space of of the main disk of
the player or the SD card. Press
or to switch between the two disks’ memory information.
5. Firmware Version: Show the information of firmware version.
6. Firmware Upgrade
The player is provided with the firmware upgrade tool to upgrade or repair its firmware.
① Download the latest firmware version.
② Connect the player with the USB port of PC and make sure that the connection is correct and there is no any
other removable disks which are connected to the PC.
③ Run the tool.
If the internal firmware of the player is in good condition, the tool will be switched to the firmware upgrade
mode and show the version of the internal firmware of the player and some other information in the top left
corner of the tool interface. Press the button “Select New Version Firmware Files” to choose the firmware file