MPF405 MP3 PLAYER User Manual
List Character--------------------------------------------------------3 Precaution-------------------------------------------------------4 Charge for the player------------------------------------------5 Format player---------------------------------------------------5 Connect to PC--------------------------------------------------6 Key sketch map-------------------------------------------------7 Screen display--------------------------------------------------8 Music mode------------------------------------
Character and parameter SNR: >95dB Output power: 5mW +5mW(32OHM) Frequency response: 20Hz~20KHz Support compacted rate:65Kbps~320Kbps USB connector: 2.
Precaution Please check for missing accessories. The player is without waterproof function, so please don't place player near water source environment. or in the condition of high temperature place, And don't put liquid bottles on the player or put the player on a heat object. Unexpected disconnection during formatting, downloading or uploading process may cause data loss or damage the player.(Our company don't have an duty on you data of player.
Charge for the player Please charge player with the adapter which comes with this player. The charger with not standard voltage is forbidden to use with the player. For the quality of the battery, when charging for the first time, please charge it after battery has been exhausted.(12 hours for the first charge time will be better) After the first charge, it will only take 4 hours to charge it full. When the player is connected to computer through USB cable, it will be charged automatically.
Connect to PC Use USB cable to connect to computer. After connected correctly, the screen will display connecting icon. At this time, you could download or upload data files and music from the computer Don't take off the USB cable when your player connecting with computer and transmitting data. When removing the player from the computer, please click the “Safety Remove Hardware” sign. When the menu appears and the player show “remove safely”, then you could remove it.
Key sketch map The functions of each key: Press < to play the previous music file and > to play the next music file, or press and hold < to fast +/- backward and > to fast forward play. To adjust volume when playing state M Choose confirm, perss and hold to go back to previous menu Make sure the ON/OFF switch is in ON position, press and hold button to boot up the player. Press and hold the button to poweroff the player. Then push the ON/OFF switch to OFF position.
Screen display Play mode EQ 8
Music mode The player supports MP3/WMA format and wav file. After booting up, press to select Music, press M to enter into music playback interface, press button to start playing music, press button again to pause the music, press and hold button to stop. Press < to play the previous music file and > to play the next music file. Press and hold < button to fastbackward and > to fast forward play. Press + to increase the volume and – to decrease the volume.
set up the start point , then screen display A-, press >once again to set up the end point when displaying icon, it will repeat playing from A to B when screen is displaying A-B On the state of repeat, press M to go back to repeat state.
Record mode Choose record mode in main menu, press M to enter to state of prepare recording Press the button to start recording, press it again to pause, press and hold it to stop and save the recording file, press and hold M button to exit, or press and hold M button while recording or pause to save the recording file and exit to main menu. Saved recording file can play from Voice mode.
Voice Mode Select Voice menu and press M button to enter. Press button to start playing sound files, press again to pause, press and hold button button to stop. Press < to play the previous file and > to play the next file. Press + to increase the volume and – to decrease the volume.
System setup Choose system setup, press M to enter to system setup interface. you can setup parameter of the player in system setup menu Time settings Backlight Language Power off Contrast Start logo Power off logo Memory info. Default F/W version Exit Time settings:Display/Set system time. Backlight: light on and user adjust is optional. Language: English, German, French, Italian, Spanish, Dutch optional.
Power off :Off time and sleep time are optional Contrast: : Brightness can be adjusted Start logo: There are two kinds of start logo for your choice Power off logo: There are two kinds of start logo for your choice Memory info: Check the capacity of player. Default: It can be renewed to default procedure F/W version: Check version of the player. Exit:Return to main menu.
Tele book Choose Tele Book, press M to enter to telebook interface. In the telebook interface: browse tel/import tel/export tel/exit Browse tel: check the telebook file which browsed to player, include name, e-mail, telephone, QQ, phone and fax information, etc. (it can enter to this function only has telebook file browsed in. System will note: no file, press and hold M to exit when it can not read any telefile.) Import tel: use this function to browse telebook from computer to player.
Text After choosingText menu, press M to enter to text interface. Player supports TXT format.
Conversion For music conversion, please use MPMANAGER software supplied in the CD ROM.
