Operating Instructions

5: Press the OK button to confirm the setting, and then press the MENU

button to close the menu.

6: Press the SHUTTER button to take picture.

Using the Flash

The flash is not only for taking pictures when there is insufficient light, but

also for when the subject is in shade or with backlight conditions. Pressing

the flash button cycles your camera through the various flash modes. The

flash will not activate during continuous shooting or movie recording.

1: Set the camcorder to the Capture mode.

2: Press the FLASH/DELETE button to change the flash mode.

Each time the flash button is pressed, the flash icon changes.

Auto: Automatically turn on/of

Flash on: Force on the flash

Flash off: Force off the flash

3: Press the SHUTTER button to take a picture.