Users Manual
Package List
We are appreciated for purchasing our Mpow Jaws6. This guide
contains instructions for setting up and using your Mpow Jaws6 easily.
×1×1×1
VIP
×1
×1
×1
×1
×1
Diagram
（Size M is preinstalled
on earbuds）
MODEL: BH418A
XS XS
MFB
NECKBAND WIRELESS
EARPHONES
MPOW JAWS6
Siri
5-7s
1-3s
How To Pair
01
02
< 1m
1. Turn on the Bluetooth function on your phone.
2. Power it on, then it will enter the pairing mode automatically. Red
and blue lights will start flashing alternately with the voice “Pairing”
3. Search for the Bluetooth devices and select "Mpow Jaws6"(Enter
the code "0000" if needed).
4. When pairing is successful, you will hear the voice “Connected”.
1. In the state of shut-down, press and hold on the MFB button for 5-7
seconds or so. Do not release it until the red and blue lights start
flashing alternately with the voice “Pairing”.
2. The rest goes the same as above.
First use
01
Pair to another device
02
Settings
DEVICES
Connected
Bluetooth
Bluetooth
Mpow Jaws6
Settings
Bluetooth
Bluetooth
Power ON / OFF
Power on
Power off
1-3s
5-7s
Double Click
X
2
Siri
Answer a call / End a call / Retract a dialing
Mute / Redial / Activate Siri
Redial
Hold on (1-2s)
Hold on (1-2s)
Click Once
X
1
Click Once
X
1
(Call mode)
Simultaneously click
both volume up and
down buttons once
Situation 1:
When the earbuds are attracted by the magnets on the neckband and a
call is coming, you can answer a call simply by removing the earbuds
from the magnets or by pressing the MFB button.
Put both earbuds back into the magnets on the neckband or press the
MFB button.
Click the MFB button once.
When you are having a phone call, simultaneously press and hold both
volume up and down buttons for 1 second.
Simultaneously press both volume up and down buttons once.
Double click the MFB button
Situation 2：
When the earbuds are not attracted by the magnets on the neckband
and a call is coming, you can answer a call by pressing the MFB button.
Answer a call
End a call
Mute
Redial
Activate Siri
Retract a dialing
Charge Battery
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment.
FCC StatementCorrect Disposal of This Product
( Waste Electrical& Electronic Equipment )
This Marking shown on the product or its literature, indicate that
it should not be disposed with other household wastes at the
end of its working life.
To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate this from other types of
wastes and recycle it responsibly to promote the sustainable reuse of
material resources.Household user should contact either the retailer
where they purchased this product, or their local government oce, for
details of where and how they can take this item for environmentally
safe recycling.
Business users should contact their supplier and check the terms and
conditions of the purchase contact. This product should not be mixed
with other commercial wastes for disposal.
Notification
Please fully charge it if it was going to lay idle for a long time and
place it in a cool and dry place. Please recharge it each 2 months for
storage.
Please fully charge it for the first use.
1.
2.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
Output : 5V
2H
Click Once
X
1
Click Once
X
1
Click Once
X
1
Click Once
X
1
Click Once
X
1
Situation 1:
After successful pairing, when the earbuds are attracted by the magnets,
you can play the music simply by removing the earbuds from the
magnets or by pressing the MFB button once.
Situation 2:
After successful pairing, when the earbuds are not attracted by the
magnets, you can pause the music by pressing the MFB button once.
When the music is playing, you can pause the music simply by putting
both earbuds back into the magnets on the neckband or by pressing
the MFB button once.
Each once you press the button “+”, the volume will increase by one level.
Play
Pause
Volume up
Each once you press the button “-”, the volume will decrease by one level.
Click the button " " once
Volume down
Next Track
Click the button " " once
Previous Track
Play / Pause / Volume Control /
Music Control