User's Guide

MP280B User’s Guide
1
Contents
1. General Information ............................................................................................................................ 5
1.1 Main Features ...................................................................................................................................... 5
2. User Interface ...................................................................................................................................... 6
2.1 Antenna interface ................................................................................................................................ 6
3. Transparent protocol ........................................................................................................................... 7
4. AT Command ....................................................................................................................................... 8
4.1 Connection interval setting .................................................................................................................. 8
4.2 Get the module name .......................................................................................................................... 8
4.3 Module rename.................................................................................................................................... 8
4.4 Get baud rate ....................................................................................................................................... 8
4.5 Baud rate setting ................................................................................................................................. 9
4.6 Get the physical address MAC ............................................................................................................. 9
4.7 Set MAC address .................................................................................................................................. 9
4.8 Module reset ........................................................................................................................................ 9
4.9 Broadcast cycle setting ........................................................................................................................ 9
4.10 Add custom broadcast content ........................................................................................................ 10
4.11 Define product identification code ................................................................................................... 10
4.12 Transmit power setting .................................................................................................................... 10
4.13 RSSI signal strength output .............................................................................................................. 11
4.14 RTC settings and acquisition ............................................................................................................ 11
5. Broadcast data setting ....................................................................................................................... 11
5.1 Default broadcast data ...................................................................................................................... 12
5.2 Custom broadcast data ...................................................................................................................... 12
6. System reset and recovery ................................................................................................................. 13
7 Technical Support and mPower Contacts ............................................................................................ 14