User's Guide

POLI User’s Guide
7
2.1.1 Status Indicator Icons
Along the top of most screens are status indicators that tell you whether a function is
operating and/or its strength or level.
Icon
Function
Wireless signal strength at 0-5 level
Pump status (pump version only)
Datalogging status (shown when datalogging is on, blank when off)
Battery voltage status
Man Down alarm enabled
All sensors tested and calibrated tick mark (all sensors have been bump tested and
calibrated; no sensor is overdue for a bump test or calibration according to the
intervals configured on the instrument.
2.1.2 Auto Flip Screen
When positioned up down, the POLI screen is automatically flipped for keeping normal
readings.
2.1.3 Keys and Interfaces
The POLI has two keys:
[+/OK] Key [ /↓] Key
Confirm/Number Increase Power/Cursor