Instructions

Page 66 07 - Maintenence & Care
19. Plug in cable
Plug the white cable back into the black
bracket of the laser head and insert the
hose. Then screw the laser head to the
mounting bracket inside your Mr Beam.
18. Tighten screws
Put the screws on the back of the laser
head back in place using an Allen-key.
17. Align holes
Note: Please check that both rectangular
holes pictured on the right are aligned
to each other when the laser front snaps
into place. There should be no overlays
which make the opening for the laser
channel smaller.
CLEANING LASER HEAD