EN DESKTOP LASER CUTTER QUICKSTART GUIDE When you start up your Mr Beam II, remember that it has been assembled and packed by us with great care. We hope that you will take the time to unpack and set it up carefully. Munich, 15. June 2018 | Rev. 1.
SAFETY INSTRUCTIONS You will find the latest update of this Quickstart Guides and some other informations about your Mr Beam II at the following QR Code. At mr-beam.org/faq you will also find answers to many questions around the Mr Beam II. Before using your Mr Beam II, read and understand the user manual and the safety instructions. You can find the latest manual and safety instructions in the menu of your Mr Beam II user interface and on mr-beam.
SCOPE OF DELIVERY - WITH AIR FILTER SYSTEM LASER HEAD MR BEAM II 2 KEYS FOCUS TOOL CABLE AIR FILTER POWER CABLE POWER SUPPLY UNIT AIR FILTER SYSTEM HOSE SUCTION SOCKET SCREWS WASHERS
SCOPE OF DELIVERY - WITHOUT AIR FILTER SYSTEM LASER HEAD MR BEAM II 2 KEYS FOCUS TOOL POWER CABLE POWER SUPPLY UNIT AIRFILTER SYSTEM For indoor use we recommend a HOSE SUCTION SOCKET FAN SCREWS WASHERS Mr Beam Air Filter System. If you don‘t have one yet, order it now from our shop at: http://shop.mr-beam.
UNPACKING THE MR BEAM II First remove the small box on the side. The laser head, the power adapter, the key and the Focus Tool are located in it. Remove the transport safeguard inside the device carefully.
SETTING UP THE MR BEAM II Name: MrBeam-XXXX S/N: 0000000XXXXXXXXX-2X P Vor Beginn von Reinigungs- und Wartungsarbeiten das GerŠt immer ausschalten und den Netzstecker ziehen. aser lasse Wartungs- und InspektionstŠtigkeiten dŸrfen nur im ausgeschalteten Zustand von geschultem Personal durchgefŸhrt werden.
CONNECTION OF LASER HEAD TO X-AXIS ! To connect and disconnect the laser head, Mr Beam II must be disconnected from the power supply system! Mount the laser head to the base plate using the knurled screw. Tighten the knurled screw moderately with two fingers. Then connect the ribbon cable to the laser head. ! The black bracket fixes the ribbon cable in the socket. To disconnect the cable and pull out the bracket carefully. For fastening, press in the bracket on both sides.
CONNECTION OF THE SUCTION / AIR FILTER SYSTEM Screw the elbow to the end of the hose (left-hand thread). Then screw the contra-angle incl. hose to the housing using the knurled screws. Also connect the Mr Beam Air Filter System or the suction with the appropriate cable. AIR FILTER SYSTEM Connect the Mr Beam Air Filter System or suction fan to your Mr Beam II. If you operate your Mr Beam II without the Mr Beam Air Filter System, you are obliged to ensure that the waste air is discharged properly.
POWER SUPPLY / SWITCH ON/OFF Name: MrBeam-XXXX S/N: 0000000XXXXXXXXX-2X P Bei Abwesenheit SchlŸssel des SchlŸsselschalters abziehen Vor Beginn von Reinigungs- und Wartungsarbeiten das GerŠt immer ausschalten und den Netzstecker ziehen. Laser Klasse 1 Wartungs- und InspektionstŠtigkeiten dŸrfen nur im ausgeschalteten Zustand von geschultem Personal durchgefŸhrt werden.
STARTING UP
MR BEAM II SETUP - OPTION 1 WIRELESS Name: MrBeam-XXXX S/N: 0000000XXXXXXXXX-2X on Vor Beginn von Reinigungs- und Wartungsarbeiten das GerŠt immer ausschalten und den Netzstecker ziehen. Laser Klasse 1 Wartungs- und InspektionstŠtigkeiten dŸrfen nur im ausgeschalteten Zustand von geschultem Personal durchgefŸhrt werden.
MR BEAM II SETUP - OPTION 1 WIRELESS 10.250.250.1 Google Chrome Type the following IP address into your Google Chrome browser to connect to your Mr Beam II: 10.250.250.1 Your Mr Beam II uses the latest web technologies and is currently only supported by Google Chrome. Welcome Dialog Your Mr Beam II will now show you around the Mr Beam Welcome Dialog. Please have the password and name of your personal WiFi ready for this purpose. find.mr-beam.
MR BEAM II SETUP - OPTION 2 CABLE ROUTER Name: MrBeam-XXXX S/N: 0000000XXXXXXXXX-2X on Vor Beginn von Reinigungs- und Wartungsarbeiten das GerŠt immer ausschalten und den Netzstecker ziehen. Laser Klasse Model: Mr Beam Wartungs- und InspektionstŠtigkeiten dŸrfen nur im ausgeschalteten Zustand von geschultem Personal durchgefŸhrt werden.
MR BEAM II SETUP - OPTION 2 CABLE ROUTER find.mr-beam.org mrbeam-XXXX.local Enter the address find.mr-beam.org or mrbeam-XXXX.local into your Google Chrome browser to log in with your Mr Beam II to connect. On a Windows PC, you can also access your Mr Beam II via the network environment. In your browser, your Mr Beam II will guide you through the Welcome Dialog. Optionally, you can integrate your Mr Beam II into your WiFi. Please have the password of your personal WiFi ready for this.
MR BEAM II SOFTWARE Continue to the material settings When the lid of Mr Beam II is open, a live image of the working area is shown here. Double-click anywhere to move the laser head to the desired position. Creating SVG files If you crate a vector file for cutting and engraving, please observe the following details: - filled areas allways will be engraved - lines can be cutted or engraved - choose different collors while creating the file to later select different parameters in the Mr Beam Software 1.
MR BEAM II SOFTWARE 2. Placement Once a file has been selected, it can be placed in the work area on the work piece. Use the arrows to scale and rotate the graphic. Click on „Laser“ in the upper left corner to access the laser settings. 3. Material settings Select the inserted material. Depending on the material, colour and material thickness can be selected. 4. Parameter assignment Depending on the material used, additional settings can be made.
MR BEAM II SOFTWARE 5. Additional settings The „Laser Intensity Range“ describes the range of the gray levels displayed in an engraving; „Engraving Speed Range“ describes the speed at which gray values are engraved. When cutting materials, „Laser Intensity“ displays the performance, „Laser Speed“ the speed as well as „passes“ how often the contour is cut. Further explanations can be found under the menu item „show explanations“. 6.
MR BEAM II FOCUSING It is needed to focus the laserhead to achieve the best result with your Mr Beam II. Because the laser light conically leaves the laser head, there is one point at which it is focused maximally, the focus point. At this point, your Mr Beam II has the maximum performance and highest precision. Therefore, the focus point should be positioned exatly on the material and must be manually adjusted to the material height.
MR BEAM II FOKUSING Step 4: Move the laser head down until it touches the cross of the focus tool. Step 5: Tighten the screw again moderately and remove the focus tool. Coarse focusing For coarse focusing, the laser head can be mounted at different positions. ! To connect and disconnect the ribbon cable, Mr Beam II must be disconnected from the power supply! First remove the laser head by using the knurled screw and put it carefully aside. It is not necessarily needed to disconnect the ribbon cable.
Happy? Tell your friends and family! Share your results on Facebook, Twitter and Instagram #madewithmrbeam Not Happy? Please visit our FAQ section: mr-beam.org/faq or contact our friendly customer service team: support@mr-beam.org © 2018 | Mr Beam Lasers GmbH | Gollierstraße 70d | Munich | Germany | www.mr-beam.