Instructions

MR BEAM II SOFTWARE
2. Placement
Once a file has been selected, it can be placed in
the work area on the work piece. Use the arrows
to scale and rotate the graphic.
Click on „Laser“ in the upper left corner to ac-
cess the laser settings.
3. Material settings
Select the inserted material. Depending on the
material, colour and material thickness can be
selected.
4. Parameter assignment
Depending on the material used, additional
settings can be made. If dierent colours were
used in the selected file, dierent parameters
can be assigned to them. By dragging into the
corresponding field, dierent tasks can be
assigned to each colour. „Skip“ (skip), „engrave“
(engraving) or „cut“ (cutting job).