Instructions / Assembly
1. Unscrew thumbscrew on mounting bracket
by turning counter-clockwise and set aside.
2. Tilt bracket back slightly.
Spotlight Features:
Motion/Light Sensor: Light instantly turns on when it detects
motion from up to 25 feet away. The light sensor conserves battery
life by preventing the light from activating in daylight.
Auto Shut-off: Light shuts o automatically after 30 seconds if no
motion is detected.
Adjustable: Bracket allows light to angle up or down.
Bright LED: 80 lumens covers up to 350 sq ft.
Durable, Weather Resistant: Tight seals and UV resistant material
allow the light to work in all weather conditions.
3. Push bracket down toward light
to unlock from keyhole.
Tips:
• For best results, use type Alkaline C-Cell batteries with 1.5V rating
• Install only new batteries of the same type in your product
• Failure to insert batteries in the correct polarity, as indicated in the battery compartment, may short-
en the life of the batteries or cause batteries to leak
• Do not mix old and new batteries
• Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmium) or (Nickel
Metal Hydride) batteries
• Do not dispose of batteries in re
• Batteries should be recycled or disposed of as per state and local guidelines
• Light may activate when batteries are rst inserted. Simply take light into dark room
Allow batteries to settle, then test activation
5. Remove front cover of spotlight by un-
screwing counter-clockwise. Pull face from
cup to reveal battery holder.
6. Push down on battery door tab to release. Insert 3 C-Cell batteries,
with at side to spring. Attach battery door by inserting tabs into the rect-
angular holes then push down on front until door clicks into place.
7. Screw face of spotlight back into
the cup by turning clockwise 3 full
rotations until tightly closed.
9. First, slide the
post into bracket,
then slide down to
locked position.
10. Align opposite
end with screw to
the hole.
8. Determine
mounting
location and
drive two screws
directly through
two holes
in mounting
bracket.
11. Choose
preferred angle of
light, then tighten
thumbscrew to
lock in position.
4. Gently pull up on post side of
bracket and lift o of light.
32333 Aurora Rd. Suite 100 Solon, OH 44139
877.298.9082
Installation Instructions
Wireless Motion Sensor LED Mini Spotlight
MB300/310
• 1 Small Screwdriver
• 3 C-Cell Alkaline Batteries
• 1 Wireless Spotlight
• 1 Mounting Bracket
• 2 Screws
• 2 Anchors
NOTE: Light sensor only allows Spotlight to activate in darkness. We recommend you test in a dark room or closet.
What you need to install per light:
Thank you for purchasing the Mr. Beams
TM
Wireless Mini Spotlight. We are committed to
eliminating darkness using the latest in
Light-Emitting Diodes (LEDs). LEDs are the most
ecient and durable light sources available. We
are certain that your light will contribute to a safer
environment and provide light where you need it at
a very reasonable cost.
What is included per light:
www.mrbeams.com
LED Light
Mounting
Bracket
Post
Mounting Bracket
Thumb Screw
Motion &
Light Sensor
* 1 year limited warranty. See enclosed card for details.
* Visit our website to view installation video.
Unlocked
Locked
Mounting Spotlight
Mounting Spotlight
Install/Change Batteries
Set Up
Battery Caution:
1) Do not mix old and new batteries
2) Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmi-
um) or (Nickel Metal Hydride) batteries
3) Do not dispose of batteries in re
4)Batteries should be recycled or disposed of as per state and local guidelines