Full Product Manual
1. Unscrew thumbscrew on mounting bracket by
turning counter-clockwise and set aside.
5. Remove front cover of spotlight by un-
screwing counter-clockwise. Pull face from
cup to reveal battery holder.
6. To release battery door push into the tab on the cover and pull up. Insert 3
C-Cell batteries, with at side to spring. Attach battery door by inserting tabs
into the rectangualr holes then push down on front until door clicks into place.
2. Tilt bracket back slightly. 3. Push bracket down toward light
to unlock from keyhole.
4. Gently pull up on post side of
bracket and lift o of light.
7. Screw face of spotlight back
into the cup by turning clockwise 3
full rotations until tightly closed.
Spotlight Features:
Motion/Light Sensor: Light instantly turns on when it detects
motion from up to 25 feet away. The light sensor conserves battey
life by preventing the light from activating in daylight.
Auto Shut-o: Light shuts o automatically after 30 seconds if no
motion is detected.
Adjustable: Bracket allows light to angle up or down.
Bright LED: 80 Lumens covers up to 350 sq ft.
Durable, Weather Resistant: Tight seals and UV resistant material
allow the light to work in all weather conditions.
Tips:
•
Use only new alkaline C-Cell batteries with 1.5V rating.
•
Do not mix old and new batteries. If batteries are not new, it may cause the light to malfunction.
•
Install batteries with polarity in correct position.
•
Light may activate when batteries are inserted. Simply take light into a dark room. Allow
batteries to settle, then test activation.
•
If your light will not turn o, it means that it is time to replace the batteries.
Installation Instructions
Mini Spotlight
MB300 / MB310
• 1 Small Screwdriver
• 3 C-Cell Alkaline Batteries
• 1 Wireless Spotlight
• Mounting Base
• 2 Screws
• 2 Anchors
NOTE: Light sensor only allows Spotlight to activate in darkness. We recommend you test in a dark room or closet.
Set Up
Install/Change Batteries
Mounting Spotlight
What you need to install:
Thank you for purchasing the Mr Beams
®
Mini Spotlight. We are committed to
eliminating darkness using the latest in
Light-Emitting Diodes (LEDs). LEDs are the most
ecient and durable light sources available. We
are certain that your light will contribute to a safer
environment and provide light where you need it at
a very reasonable cost.
What is included per light:
www.mrbeams.com
LED Light
Mounting Bracket
Thumb Screw
Mouting
Bracket
Motion &
Light Sensor
Post
* 1 year limited warranty. Visit site for details.
* Visit our website to view installation video.
Battery Caution:
1) Do not mix old and new batteries
2) Do not mix Alkaline, Standard (Carbon-Zinc) or Rechargeable (Nickel Cadmi-
um) or (Nickel Metal Hydride) batteries
3) Do not dispose of batteries in re
4)Batteries should be recycled or disposed of as per state and local guidelines
600 Beta Drive, Mayeld Village, Unit 100, Mayeld, OH 44143
877.298.9082
Locked
8. Determine
mounting
location and
drive two screws
directly through
two holes in
the mounting
bracket.
9. First, slide
the post into the
bracket, then slide
down into the
locked position.
10. Align opposite
end with the screw
to the hole.
11. Choose
preferred
angle of light,
then tighten
thumbscrew
to lock in
position.