Operator`s manual

8
EN
7.1 DUAL ACTION SWITCH
The engine is controlled by a dual
action switch to prevent starting it
accidentally.
To start, press the button (2) and pull
the lever (1).
The engine automatically stops when
the lever (1) is released.
7.2 CUTTING HEIGHT ADJUSTMENT
The cutting height is adjusted by
attaching the wheels to the required
hole, fully tightening the pin (1) using
the wrench (2) provided.
All the wheels must be at the same
height.
MAKE THIS ADJUSTMENT ONLY
WHEN THE BLADE IS STOPPED.
7.
DESCRIPTION OF CONTROLS
1 2
STOP
START
12 1
2