MR.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and/or injury to persons, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING THE MACHINE. 2. Do not touch hot surfaces. Use handles or knobs. 3 . To protect against electric shock, do not immerse cord, plugs or machine in water or any other liquid. 4. Close adult supervision is necessary when this appliance is used by or near children. 5 .
SPECIAL C O R D S E T I N S T R U C T I O N S 1. A short power supply cord is provided lo reduce tthe hazards resultng from becoming entangled in or tripping over a longer cord. 2. An extension cord may be purchased and used if care is exercised in its use. 3. If an extension cord is used, the marked electrical rating of the extension cord must be at least 10 amps and 120 volts.
INTRODUCTION CONGRATULATIONS! You are the owner of a MR. COFFEE” Iced Tea Maker. This unique appliance will enable you to prepare 3 quarts of delicious iced tea in your very own home. Please read & of the instructions in this manual carefully before you begin to use this appliance. Proper care and maintenance will ensure the long life of this appliance and its trouble-free operatipn. Save these instructions and refer to them often for cleaning and care tips. T ABLE OF C ONTENTS Safeguards . . . . . . .
O PERATION AND US E BEFORE FIRST USE Before using your Iced Tea Maker for the first time, follow these easy cleaning instructions. WARNING: To prevent injury from steam, do not plug the unit in until water is in the reservoir, lid is closed and the pitcher is in place. 1. Wash pitcher/lid and brew basket by using a mild, non-abrasive detergent and water. Rinse each thoroughly. 2. Next, fill pitcher with water to the top water level mark on the pitcher. Lift the reservoir lid, remove the brew basket.
PRECAUTIONS WHEN USING THIS MACHINE Place the machine well back from the edge of the counter. l To stop the brewing cycle before completed, grasp the molded plug and unplug from electrical outlet. l Avoid areas which may become hot or emit steam when the machine is on, particularly the steeping basket and water reservoir. The water reservoir lid must be on while the machine is brewing. l * Unplug the unit when not in use or when wiping the exterior. Wipe with a damp cloth only.
BREWING 1. Fill the pitcher with fresh, cold tap water to the desired “water” level capacity. Be careful not to overfill. 2. Lift the water reservoir lid, remove the brew basket. Pour water into the reservoir. (See Illustration) 3. Place the brew basket into place. (See Illustration) 4. insert an 8-12 cup paper filter into the brew basket. Add desired amount of tea. (Refer to the Measurement Chart) You may now add sugar, lemon or other flavorings to the brew basket to suit your taste. 5.
READ CAUTION BEFORE CONTINUING CAUTION: Do not operate the appliance unless the pitcher and lid are pushed snugly against the appliance. Hot water and hot steam could escape and cause injury. 9. Turn appliance on by plugging the cord into an electrical outlet. Push the “on” button firmly until a click is heard. The indicator light will come on when the button is released. 10. When the brewing cycle is complete, the appliance will automatically shut off and indicator light will go out.
HELPFUL HINTS l l l l l Use only fresh, cold tap wafer in the appliance. Use MR. COFFEE” 8-12 cup basket filters for best brewing performance, The steeping lever may be moved to the right for stronger tea or the left for weaker tea, to suit your taste. Additional tea bags may be needed when using herbal tea, If your ice supply is low, you may substitute cold water.
I-Y EAR LIMITED WARRANTY Sunbeam Products, Inc. (“Sunbeam”) warrants that for a period of ONE year front the date of purchase, this product will be free from defects in material and workmanship. Sunbeam, at its option, will repair or replace this product or any component of the product found to be defective during this warranty period. Replacement will be made with a new or remanufactured product or component.
MR.
