User Manual

This is due to the minimum absorption of water by the
coffee grounds.
7. Lift the brew basket lid and pour the water into the
water reservoir. Close the lid and place the empty
decanter onto the warmer plate.
NOTE: Make sure the decanter is fully placed on the
warming plate or the water and the grounds will overflow
from the filter basket. An overflow may cause personal
injury or damage to property.
CAUTION! To reduce the risk of damaging the
decanter and/or the risk of personal injury, do not
add cold water to the decanter if the decanter is
already hot. Allow the decanter to cool before using.
BREWING COFFEE NOW
1. After completing the steps
in the “Adding Water and
Ground Coffee” section and
with the decanter and the
filter basket securely in place,
turn the coffeemaker on by
pressing the SELECT button
once. The Brew Now/Off green light will
turn on and pulse to signal that the coffeemaker is on
and brewing ( Figure 6).
2. To enjoy a more full flavored
cup of coffee, press the
STRONG Brew button once.
The STRONG Brew amber light
will turn on. The coffeemaker
will remain in the Brew Strength
you have selected until you
change it back to REGULAR
strength by pressing the Brew Strength
button or until you unplug the machine (Figure 7).
3. The coffeemaker will beep 5 times when brewing is
complete. The green Brew Now/OFF light will stay on for
2 hrs to show that the warming plate is on. After 2 hrs it
will automatically shut off and the coffeemaker will beep
3 times. Note: Warming plate will be hot for those 2 hrs.
4. After the used coffee grounds have cooled, carefully
remove the filter basket and discard them.
NOTE: The shower head cover is hot after brewing. Always
allow the coffeemaker to cool down before cleaning.
5. Prior to making a second pot of coffee, turn the
coffeemaker off. This will reset the FRESH BREW™ TIMER
feature. To turn the coffeemaker off, press the Brew
Now/OFF button all lights will turn off.
6. Make sure the decanter is empty before starting to
brew coffee.
7. Be sure to turn your coffeemaker off when no longer using it.
The Fresh Brew™ Timer Feature
The FRESH BREW™ TIMER feature
lets you know how long your
coffee has been waiting for you.
At the start of the brew cycle,
the FRESH BREW™ TIMER feature
will automatically be activated.
Press the FRESH BREW™ TIMER
button once (Figure 8) and
the clock time will change to
show the amount of time that has passed since brewing
completed. Push again to display current time.
NOTE: The Brew Now/Off green light must be on for the FRESH
BREW™ TIMER feature to operate. The time and delay brew time
cannot be set when the fresh brew time is displayed.
BREWING COFFEE LATER
1. You must first set the time when you would like the
coffeemaker to begin brewing your coffee as described
in “Setting the Clock and the Delay Brew Timer” section.
14 15
Figure 6
Figure 7
Figure 8
BVMC-PJX Series_15ESM1.indd 15-16 5/28/15 11:36 AM