User Guide

Coiled & Wrapped
excess refrigerant line
Outdoor Unit (Exterior / Condenser)
Refrigerant Piping
Signal Cable
(inside conduit)
Drainage Pipe
Wrapped piping with U.V. Tape
Quick Connect
®
connections
Sound Deadening Pads to
wrap connections once
connected and checked for
leaks.
BEFORE PERFORMING ELECTRICAL WORK, READ THESE REGULATIONS
All wiring must comply with local and national electrical codes.
2. All electrical connections must be made according to the
Electrical Connection Diagram
located on
the panels of both the indoor and outdoor units.
3.
If there is a serious safety issue with the power supply, stop work immediately. Explain your
to the client, and refuse to install the unit until the safety issue is properly resolved.
4.
5.
6.
7. Do not connect another appliance to the same circuit as the unit.
8. Make sure to properly ground the unit.
9.
Do not allow wires to touch or rest against the refrigerant tubing, compressor, or any other moving
part within the unit.
combustible materials.
Page 31
mrcool.com
Refrigerant Piping Connection
1.
10.
11.