manual

2
GB
A B
Red wire The + voltage of the car’s power supply
Blue wire Ignition
Black wire The negative GND connection (-)
Brown wire Used for Car Radio Muting (CRM) and has to be connected to the car radio (Mute)
3. BC 6000m PRO: for professional installation with sound of carkit over the car speakers
SEE SEPARATE SHEET ‘INSTALLATION SCHEME’.
a. Connect the 6-pin plug and mono jack plug to the speaker unit.
b. Connect the yellow separate wire to the car radio (optional). (Used for Car Radio Muting (CRM) and
has to be connected to the car radio (Mute))
c. Connect the ISO plugs to the car and the radio (maybe you will need conversion leads, which are
not included)
SEE ILLUSTRATION III
The button unit (a) needs to be mounted on the dashboard.
The microphone (b) needs to be mounted close to the user’s head (30 cm is optimal) and directed towards
the mouth.
Installation tips:
- Make sure that the dashboard is clean and free of dust or grease before sticking the double-sided tape!
- Make sure that the unit is clean and free of dust or grease before sticking the double-sided tape!
- For optimal performance, the microphone should be located at a maximum distance of 50 cm from the
driver’s mouth.
- Please also carefully check the separate sheet that is included with this product.