Technical Specifications

ManualsBrandsMr. Heater ManualsGas Garage Heaters10' Straight Tube 40,000 BTU Garage Heater

• Efﬁciently heat manufacturing plants, truck terminals, repair shops,

warehouses, aircraft hangers, green houses, farm buildings

• Tube heaters provide more usable heat per BTU than standard

forced air heaters by heating the objects below which secondarily heat the air

• Sealed burner system

• Thermostat required (Use any standard 24V thermostat; sold separately)

• Polished aluminum reﬂector

• Stainless steel couplers and chrome plated hanging brackets

• 16 gauge aluminized tubing

• 10 year warranty

• 89% efﬁciency

• Direct venting required

Tube sets are sold in 10’ lengths.

All units available in approximately 1 week

RADIANT TUBE

HEATERS

Summary of content (5 pages)

PAGE 1
RADIANT TUBE HEATERS • Efficiently heat manufacturing plants, truck terminals, repair shops, warehouses, aircraft hangers, green houses, farm buildings • Tube heaters provide more usable heat per BTU than standard forced air heaters by heating the objects below which secondarily heat the air • Sealed burner system • Thermostat required (Use any standard 24V thermostat; sold separately) • Polished aluminum reflector • Stainless steel couplers and chrome plated hanging brackets • 16 gauge aluminized tubing •
PAGE 2
HOW TO BUY TUBE HEATERS: STEP 1 Measure room and determine heater size H D The square footage is calculated on a 40º F temperature rise to outside temperature. Assumes insulated walls(R-11 or R-13, 4”) & insulated ceiling (R-38, 12”). W UP TO SQUARE FOOTAGE (W x D) Sizing guide based on input BTU. Output BTU is 89% efficient. CEILING HEIGHT 10 ft 12 ft 500 SQ. FT. 14 ft 16 ft 40,000 BTU 40,000 BTU 18 ft 20 ft 25 ft 750 SQ. FT. 40,000 BTU 40,000 BTU 60,000 BTU 60,000 BTU 1,000 SQ. FT.
PAGE 3
STEP 2 Tube configuration and length Tube Sets (available in 10’ increments) Tube Set SKU# MATCH BURNER BTU Length in Feet 635-0160 40,000 10 635-0161 60,000 or 80,000 20 635-0162 100,000 30 635-0163 100,000 or 125,000 40 635-0164 125,000 or 150,000 or 175,000 50 635-0165 150,000 or 175,000 60 635-0171 90 degree bend Sold Separately as accessory 635-0170 180 degree “U” tube Sold Separately as accessory 3 Tube configurations Straight: 90º bend: 180º bend
PAGE 4
STEP 3 Method of mounting Hanging brackets included Requires chains & hardware (sold separately)
PAGE 5
STEP 4 Venting required 4” B-vent through ceiling & exterior (sold separately) CEILING VENT ADAPTER (included) LAST HEATER TUBE B-VENT SINGLE WALL VENT