Electric Heater User Manual

ASSEMBLY AND OPERATING INSTRUCTIONS FOR

Model No. MH12, INFRA-RED CAMP HEATERS

Model MH12

No. Description

1 Wire Guard

2 Mesh Screen

3 Thermo-Couple

4 Regulator Valve Knob

5 Regulator

6 Propane Gas Cylinder

7 Reflector Bowl Assembly

8 Mixing Tube

9 Orifice

10 Mixing Tube Lock Nut

11 Valve Button

12 Safety Shut-Off Valve

13 Plastic Stand

ENERCO / MR HEATER

4560 W. 160

ST., CLEVELAND, OHIO 44135

TEL: 1-800-251-0001 FAX: 1-800-321-0552

PAGE 1
ASSEMBLY AND OPERATING INSTRUCTIONS FOR Model No. MH12, INFRA-RED CAMP HEATERS No. 1 2 3 4 5 6 7 8 9 10 11 12 13 Description Wire Guard Mesh Screen Thermo-Couple Regulator Valve Knob Regulator Propane Gas Cylinder Reflector Bowl Assembly Mixing Tube Orifice Mixing Tube Lock Nut Valve Button Safety Shut-Off Valve Plastic Stand Model MH12 ENERCO / MR HEATER 1 4560 W. 160TH ST.
PAGE 2
GENERAL A new feature of the series MH12 heaters is a 3-step regulator valve that has a high setting and a low setting. The Infra-Red series MH12 camp heaters are tested and shipped from the factory assembled, except for the propane gas cylinder. The Camp Heaters will operate approximately – 1 ½ hours on a 14 oz. Cylinder - Disposable 18 ½ hours on No. 2011 P.O.L. Cylinder – Refillable 37 hours on No. 2020 P.O.L.