OPERATING INSTRUCTIONS AND OWNER'S MANUAL Gas-Fired Infra-Red Portable Construction Heater

Tip-Over Switch Arrangement

NOTE: The purpose of the tip-over Switch is to stop the flow of gas

when heater is accidentally knocked over. When and if the heater

is knocked over, simply stand heater up.

REPLACEMENT PARTS LIST

REF. # ....... ITEM# DESCRIPTION

1 ..............23525 ......... CONT M-N SS PORT 3/8MPXI/4MP

2 ..............23526 ......... BURNR/LTFR PORTABLES/D1096

3 ..............23527 ......... ORIFICE/BURNER #55 DRILL

4 ..............23513 ......... THERMOCOUPLE ASSY/18”

5 ..............23529 ......... TIP-OVER SWITCH 6” LEAD(PORT)

6 ..............23530........ JUNCTION BLK ADPTR KIT/TIPSW

7 ..............11663 .......... REC.L/P 21” WC OUT

8 ..............23531........ IGNITOR, MODEL#35

9 ..............20735........ PIEZO, MODEL#35

10 ............23532........ WHEEL, MODEL#35

11 ............23533........ AXLE, MODEL#35

12 ............23534........ AXLE BRACKETS, MODEL#35

13 ............23517........ HANDLE

14 ............23536........ WHEEL LOC

15 ............70722........ MAIN FRAME LOWER ASSEMBLY

16 ............14504........ THERMOCOUPLE BRACKET

Figure 4

Magnetic Portion

of Control

Tip Over

Switch

Thermocouple

Tip Over

Switch

Leads

Adaptor

Leads

Heater Bottom

Junction Block

Adaptor Kit

Control

Operating Instructions and Owner’s ManualEnerco Group, Inc. | Gas-Fired Infra-Red Portable Construction Heater