New Products X4 Steel Incandescent or LED Exit Sign Sunspec™ Decorative Fixture Combining emergency and conventional, normally-on lighting in one fixture, the Sunspec™ can be used in semirecessed, T-Bar, pendant, surface and wall mount applications. A combination exit, emergency lighting unit, molded in tough high impact thermoplastic with a scratch-resistant suede finish. Mix and match with other X4 emergency units and remote fixtures. See p.15 See p.
Table of Contents Introduction PulseType Circuitry Improved Diagnostics Popular Options 2-3 4 5 6 Decorative Series Phantom™ Series TBR Series RD Series 605P1 Series RSTH Decorative Series Cavalier® II (CA-2) Series Sunspec™ Series Gloweye™ Series Permanence™ Series Square-Lite, SQ, SQ-D Series 8-9 10 11 12 13 14 15 16 17 18 Commercial/Industrial Battery Units IC-2 Series LCA-2SQ Series LCA-2MR Series KB-1 Series DM, DS Series MG, MN Series PG, P12G Series PN, P12N Series PQ, P12Q Series S12E Series S24
PulseType Circuitry Lightalarms PulseType circuitry utilizes the latest in solid state design to provide a technically advanced charger combined with features and functions that promote long reliable battery life and excellent unit performance. The design of the PulseType circuit takes into account the long periods of inactivity typical of standby emergency equipment. Batteries are kept at full capacity by a pulse charge that allows the battery to cycle continuously.
Improved Diagnostics STANDARD FEATURES By incorporating our most popular standard diagnostics features with a high-powered 8-bit microcontroller, our new Improved Diagnostics system ensures unsurpassed reliability in one, totally contained system. In the event of an equipment malfunction, the Improved Diagnostics system produces an audible warning in the form of an intermittent beep and the LED indicator associated with the fault will illuminate continuously.
Popular Options Lightalarms life safety equipment is available with a range of options that can be added to enhance performance, simplify testing or adapt equipment for use in specific environments. Please refer to individual product pages to verify availability of individual options on specific equipment. Voltmeter Option provides a visual indication, in the test mode, of the unit’s battery voltage. The good/check meter face allows maintenance personnel to recognize charger and battery function.
Decorative Series Phantom™ Series TBR Series RD Series 605P1 Series RSTH Decorative Series Cavalier ® II (CA-2) Series Sunspec™ Series Gloweye™ Series Permanence™ Series Square-Lite, SQ, SQ-D Series 8-9 10 11 12 13 14 15 16 17 18 Decorative Series 7
NE W YORK CI T Y APPROVED US Phantom Series TM 12 or 24-Volt Recessed Cabinet Emergency Lighting System Maintenance-Free Lead-Calcium Battery Evaluated to UL 924 Standard The Phantom™ Series emergency lighting system uses recessed cabinetry to conceal all internal components within wall or ceiling cavities, remaining almost invisible until needed. When AC fails and the lights go out, the Phantom™ unit emerges, illuminating the path to safety.
DIMENSIONS 12V, 100W UNIT UNITS UP TO 12V, 70W 9-1/8” 5-1/4” 6-15/16” 3-7/16” 9-1/8” 5-1/4” 6-15/16” 23-3/4” ** 7-15/16” 3-7/16” Charger & Battery Compartment: For use in walls or ceilings with a cavity, not for use in block walls or solid ceilings. 29” ** 7-15/16” Charger & Battery Compartment: For use in walls or ceilings with a cavity, not for use in block walls or solid ceilings. Note: Not suitable for T-Bar ceiling Dimensions are approximate and subject to change.
U®L NE W YORK CI T Y APPROVED TBR Series 6 or 12-Volt Decorative Style T-Bar Unit Maintenance-Free Lead-Calcium or Nickel-Cadmium Battery UL Listed The TBR Series battery units are designed for T-Bar ceiling grid installation. This slim-line, unobtrusive unit is ideally suited for any commercial location where there is limited wall space and where the greater directional flexibility of ceiling-mounted heads is needed to provide greater distribution.
U®L NE W YORK CI T Y APPROVED RD Series 6 or 12-Volt Decorative Style Recessed Unit Maintenance-Free Lead-Calcium or Nickel-Cadmium Battery UL Listed The RD Series battery units are designed for fully recessed installation in walls or ceilings. Models are available with two ELF645 heads standard, or two ELF2, ELF648 or DR1130 heads optional, to accent any décor. FEATURES Reliability The RD Series has a three-year fully warranty (excluding lamps).
U®L NE W YORK CI T Y APPROVED 605P1 Series 6 Volt Decorative Recessed Gimbal Maintenance-Free, Lead-Calcium, Long Life Lead or Nickel-Cadmium Battery UL Listed The 605P1 Series, a classic top-hat style unit with gimbal mounted lamp, fully recesses into ceiling with only the lens and trim visible. Ideal for low ceilings and blends inconspicuously with existing recessed lighting schemes. FEATURES Reliability The 605P1 Series has a three-year full warranty (excluding lamps).
US RSTH Decorative Series 6 Volt Self-Powered Recessed Down Light Maintenance-Free, Long Life Nickel-Cadmium Battery Evaluated to UL 924 Standard The RSTH Decorative Series integrates contemporary design elements with the latest in high-tech emergency lighting capabilities. This selfpowered down light brings architects, designers and engineers a sleek, refreshing new take on emergency lighting solutions.
U®L Cavalier® II (CA-2) Series 6 Volt Decorative Style Equipment Maintenance-Free Sealed Lead-Calcium or Nickel-Cadmium Battery (optional) UL Listed The Cavalier® II (CA-2) Series, is an aesthetically attractive, economical unit in a compact, contemporary design. It is ideal for commercial and institutional facilities. FEATURES Reliability The Cavalier® II (CA-2) Series has a three-year full warranty (excluding lamps and fuses).
US Sunspec Series TM Dual-Purpose Decorative Ceiling Luminaire Sealed Maintenance-Free Long Life, Nickel-Cadmium Battery Evaluated to UL 924 Standard The Sunspec™ Series, with its sleek profile and circular shape, sets new standards for aesthetics and performance. The new generation of architectural emergency lighting fixtures that combines emergency mode operation with conventional, normally-on lighting. FEATURES Reliability The Sunspec™ Series has a three-year full warranty (excluding lamps and fuses).
NEMA-3 Rated US Gloweye Series TM Dual-Purpose Decorative Wall or Ceiling Luminaire Sealed Maintenance-Free long life, Nickel-Cadmium Battery Evaluated to UL 924 Standard The Gloweye™ Series, the new generation of architectural emergency lighting fixtures, combining emergency mode operation with conventional, normally-on lighting. Ideal for damp, wet and humid covered areas such as indoor swimming pools and garages. An attractive design combined with the strength of a weatherproof enclosure.
US Permanence Series TM Dual-Purpose Decorative Wall or Ceiling Luminaire Sealed Maintenance-Free long life, Nickel-Cadmium Battery Evaluated to UL 924 Standard The Permanence™ Series was designed for institutional and commercial environments where overall style of décor is essential, but directional lighting is not critical. The unit is available as surface mount, semi-recessed or fully recessed mount.
U®L Square-Lite SQ, SQ-D Series 6 Volt Decorative Style Equipment Sealed Maintenance-Free Lead-Calcium or Nickel-Cadmium Battery UL Listed The SQ, SQ-D series was designed for institutional and commercial environments where overall style of décor is essential, but directional lighting is not critical. The standard Square-Lite is available as surface mount, but optional mounting includes semi-recessed and fully recessed.
Commercial/Industrial Battery Units IC-2 Series LCA-2SQ Series LCA-2MR Series KB-1 Series DM, DS Series MG, MN Series PG, P12G Series PN, P12N Series PQ, P12Q Series S12E Series S24E Series SL Series SN Series S12L Series S12N Series S24N Series WP Series FG, F12G Series ECN, E12CN, ENN, E12NN Series Severe™ XV Combo Series Severe™ V Series Hazardous Location EL, E12L Series EXP6N, EXP12N Series X402 Series EPF401 Series EC, E12C, EN, E12N Series 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
U®L US IC-2 Series 6 Volt Ultra-Slim Emergency Unit Sealed Maintenance-Free Lead Calcium Battery UL Listed The IC-2 Series, is an aesthetically attractive, economical unit ideal for commercial or institutional facilities. This unit offers reliable performance in a low profile, contemporary design. FEATURES Reliability The IC-2 Series has a three-year full warranty (excluding lamps and fuses).
U®L Listed LCA-2SQ Series 6 Volt Thermoplastic Battery Unit Damp Location Listing is standard on all models Sealed Maintenance-Free Lead Calcium Battery UL Listed The LCA-2SQ Series, an extremely versatile unit, that can be wall or ceiling mounted. With the option of 11 watts remote capacity and standard damp location listing, this emergency lighting unit with adjustable heads is your solution for emergency lighting.
U®L Listed LCA-2MR Series 6 Volt Thermoplastic Battery Unit Damp Location Listing is standard on all models Sealed Maintenance-Free Lead Calcium Battery UL Listed The LCA-2MR Series, is the perfect battery unit for use where style and design are required in an economical package. FEATURES Reliability The LCA-2MR Series has a three-year full warranty (excluding lamps and fuses).
U®L Listed KB-1 Series 6 Volt Thermoplastic Battery Unit Sealed Maintenance-Free Lead Calcium Battery UL Listed The KB-1 Series combines style, economy and performance in a compact, easy-to-install emergency light unit. It has all the features of larger, more expensive units, but is the ideal unit for institutional facilities where limited space and economy are concerns. FEATURES Reliability The KB-1 Series has a three-year full warranty (excluding lamps and fuses).
U®L Listed DM, DS Series 6 or 12 Volt Thermoplastic Emergency Unit Sealed Maintenance-Free Lead Calcium Battery UL Listed The DM, DS Series, is an excellent combination of economy and quality – the best offered in the industry. This unit is compact, lightweight and corrosion resistant. FEATURES Reliability The DM, DS Series has a three-year full warranty (excluding lamps and fuses).
NE W YORK CI T Y APPROVED US U®L Listed MG, MN Series 6 or 12 Volt Steel Emergency Unit Sealed Maintenance-Free Lead Calcium or Nickel-Cadmium Battery UL Listed The MG, MN Series battery unit incorporates a complete range of high performance and labor saving features normally found only in higher voltage units. The compact housing design meets most requirements for moderate loads. The MG, MN Series is a reliable, economic unit for all public areas.
NE W YORK CI T Y APPROVED U®L Listed PG, P12G Series 6 or 12 Volt Steel Emergency Unit Sealed Maintenance-Free Lead Calcium Battery UL Listed The PG, P12G Series battery units combine reliability, versatility, performance and cost-efficiency in an aesthetically pleasing design. Ideally suited for a range of commercial applications. FEATURES Reliability The PG Series has a three-year full warranty (excluding lamps and fuses).
NE W YORK CI T Y APPROVED U®L Listed PN, P12N Series 6 or 12 Volt Steel Emergency Unit Sealed Maintenance-Free Nickel-Cadmium Battery UL Listed The PN, P12N Series battery unit is a traditionally styled, high performance unit, designed for environments where lighting units may be exposed to fluctuations in temperature. FEATURES Reliability The PN Series has a three-year full warranty (excluding lamps and fuses).
NE W YORK CI T Y APPROVED U®L Listed PQ, P12Q Series 6 or 12 Volt Steel Emergency Unit Sealed Maintenance-Free Lead Calcium Battery UL Listed The PQ, P12Q Series battery unit is an effective, functional unit designed with high capacity maintenance-free batteries for commercial, institutional or industrial environments requiring remote capability or extended emergency lighting time. FEATURES Reliability The PQ Series has a three-year full warranty (excluding lamps and fuses).
NE W YORK CI T Y APPROVED U®L Listed S12E Series 12 Volt Commercial/Industrial Emergency Unit Sealed Maintenance-Free, Lead-Calcium Battery UL Listed The S12E Series battery unit is best suited for applications requiring high capacity maintenance-free batteries, multiple remote capabilities or extended operating times. The 12-volt battery allows for longer remote wiring runs. FEATURES Reliability The S12E Series has a three-year full warranty (excluding lamps and fuses).
U®L Listed S24E Series 24 Volt Commercial/Industrial Emergency Unit Sealed Maintenance-Free, Lead-Calcium Battery UL Listed The S24E Series battery unit is best suited for applications requiring high capacity maintenance-free batteries, multiple remote capabilities or extended operating times. The 24-volt battery allows for longer remote wiring runs. FEATURES Reliability The S24E Series has a three-year full warranty (excluding lamps and fuses).
NE W YORK CI T Y APPROVED U®L Listed SL Series 6 Volt Emergency Unit with Remote Capability Long Life Wet Refillable Lead-Acid Battery UL Listed The SL Series battery unit is offered where a reliable, long-life, low-maintenance wet battery unit is required. This series was designed for remote capability and offers a selection of battery capacities. FEATURES Reliability The SL Series has a three-year full warranty (excluding lamps and fuses).
NE W YORK CI T Y APPROVED U®L Listed SN Series 6 Volt Emergency Unit with Remote Capability Long Life Wet Refillable Nickel-Cadmium Battery UL Listed The SN Series battery unit was designed for industrial locations requiring long lasting emergency light units. Unit is available in a wide range of capacities, and offers the special advantages of the Nickel-Cadmium battery, including excellent recharging capabilities.
NE W YORK CI T Y APPROVED U®L Listed S12L Series 12 Volt Emergency Unit with Remote Capability Long Life Wet Refillable Lead-Acid Battery UL Listed The S12L Series battery unit was designed for industrial areas requiring high capacity units with multiple remote capabilities. FEATURES Reliability The S12L Series has a three-year full warranty (excluding lamps and fuses).
NE W YORK CI T Y APPROVED U®L Listed S12N Series 12 Volt Emergency Unit with Remote Capability Long Life Wet Refillable Nickel-Cadmium Battery UL Listed The S12N Series battery units are excellent high capacity units – ideal where extended run times may be required or remote fixtures/exits will be connected. This unit will provide excellent performance over extended temperature ranges. FEATURES Reliability The S12N Series has a three-year full warranty (excluding lamps and fuses).
U®L Listed S24N Series 24 Volt Commercial/Industrial Emergency Unit Long-Life Wet Refillable Nickel-Cadmium Battery UL Listed The S24N Series battery unit is best suited for applications where extended run times are required, and/or remote fixtures or exits will be connected. Unit offers excellent recharging capabilities and superior performance over extended temperature ranges. FEATURES Reliability The S24N Series has a three-year full warranty (excluding lamps and fuses).
WP Series 6 or 12 Volt Weatherproof Emergency Unit Maintenance-Free Lead-Calcium, Wet Refillable Lead Acid or Wet Refillable Nickel-Cadmium Battery The WP Series battery unit is designed with a special enclosure for applications where a weatherproof unit is required. FEATURES Reliability The WP Series has a three-year full warranty (excluding lamps and fuses). Unit Data The housing is constructed of heavy-duty steel with front access to the battery and all components.
U®L Listed FG, F12G Series 6, 12 or 24 Volt Weather and Corrosion-Resistant Emergency Unit Sealed Maintenance-free Lead Calcium or Nickel-Cadmium Battery UL Listed The FG Series battery unit was designed for industrial applications, especially for installations in a corrosive atmosphere. This enclosure is fully gasketed and is furnished with stainless steel hardware. FEATURES Reliability The FG Series has a three-year full warranty (excluding lamps and fuses).
ECN, E12CN, ENN, E12NN Series 6 or 12 Volt NEMA Industrial Emergency Unit Sealed Maintenance-free Lead Calcium or Nickel-Cadmium Battery Series meets requirements for operation under NEMA 1, 2, 3, 3R, 3S, 4, 4X, 12 and 13 conditions This NEMA Industrial emergency lighting unit series are designed for use in hostile environments where the presence of water, fibers, dirt, dust and corrosive gases can be potentially damaging to internal components FEATURES Reliability The ECN, ENN (6 volt), E12CN and E12NN (1
Patent Pending NEMA-4X U®L Listed Severe XV Combo Series TM 6 or 12 Volt Weather and Corrosion-Resistant Emergency Unit Maintenance-Free Nickel Cadmium Battery UL Listed UL Listed for wet and damp locations (+10°C to +40°C) (+50°F to +104°F) The Severe™ XV Combo Series is designed and engineered with style in mind and sets new standards for emergency lighting in today’s toughest environments. The Severe XV is suitable for industrial and commercial applications as well as all public facilities.
Patent Pending NEMA-4X U®L Listed Severe V Series TM 6 or 12 Volt Nema-4X Emergency Battery Unit Sealed Maintenance-Free Lead-Calcium or Nickel Cadmium Battery UL Listed UL Listed for wet and damp locations (-40°C to +40°C) (-40°F to +104°F) The Severe™ V Series was designed for use in commercial as well as industrial heavy-duty environments, such as hose-down areas, foodprocessing facilities, parking garages as well as harsh environments.
DIMENSIONS Dimensions are approximate and subject to change UNIVERSAL MOUNTING BRACKETS PMK KIT (screws included) Beam Mounting Superstrut Mounting ORDERING FORMAT 2 V12G2 /M12 -B -D # of Heads Series Lamps Color Charger Options 2= 2 heads VG1= 6V-18W, Lead-Calcium V12G1= 12V-24W, Lead-Calcium V12N1= 12V-24W, Nickel-Cadmium V12G2= 12V-36W, Lead-Calcium V12G3= 12V-54W, Lead-Calcium /L5= LED 12V-5W /M6= 6V-6W, MR16 /M12= 12V-12W, MR16 /MH20= 12V-20W, MR16-IR -B= Black -G= Gray -M= White -
Hazardous Locations Hazardous areas are those in which a potential for explosion or fire exists, due to the presence of certain gases, liquid vapors, combustible dusts or fiber particles suspended in the air. The National Electrical Code®, NEMA, OSHA, UL, NFPA Life Safety Standards, as well as State and Local codes, prescribe the use of emergency lighting equipment. This equipment itself must not contribute to the ignition of flammable or explosive substances, present in the location.
U®L Listed EL, E12L Series 6 or 12 Volt, Class I, Division 2 Emergency Unit Sealed Maintenance-Free Lead Calcium battery Ul Listed This series of self-contained emergency lighting units are designed to meet the specific requirements of Class I, Division 2 hazardous areas, Groups A, B, C and D. Typical Applications: Manufacturing or Chemical Plants, Paint Shops, Wet or Corrosive Areas and Food Processing Areas*. *Shatter resistant Teflon lamp coating optional.
Spin-off gasketed cover Copper-free cast aluminum EXP6N, EXP12N Series 6 or 12 Volt Hazardous Location Emergency Unit Sealed Maintenance-free Nickel-Cadmium Battery For operation in Hazardous areas Class I, Divisions 1 & 2, Groups C & D Class II, Divisions 1 & 2, Groups E, F & G Lighting Fixture and battery housing comply with NEC, OSHA and NEMA specifications for all above Classes and Groups 3/4” NPT conduit entrance Stainless Steel Vent/Drain The EXP Series explosion proof lighting systems are comple
LAMP SELECTION CHART Lamp Type High Intensity Tungsten (HIT) BI-PIN Halogen DIMENSIONS Voltage Watts 6V 6V 12V 12V 12V 6V 6V 6V 6V 6V 12V 12V 9W 18W 9W 18W 25W 6W 8W 10W 12W 15W 8W 12W Replacement Suffix # 135 136 138 139 140 784 785 787 786 JC6V-15W 774 783 L9 L18 L9 L18 L25 LH4 LH5 LH7 LH6 LH1 LH8 LH3 Housing: 12" X 12" X 9-1/2".
X402 Series EFXPC= Ceiling Mount Explosion-Proof, Remote Exit Sign Fixture For operation in Hazardous and/or Wet locations AC or DC Operation Class I, Divisions 1 & 2, Groups C & D (300W PS-25 max) Class II, Divisions 1 & 2, Groups E, F & G (60W max) Class III, Division 1 & 2 (150W max) Lighting Fixture complies with NEC, OSHA and NEMA specifications for all above Classes and Groups and is UL listed for use in Paint Spray areas (75W max) These Remote Emergency Exit signs are designed for mounting in locati
EPF401 Series Explosion-Proof, Remote Lighting Fixture For operation in Hazardous and/or Wet locations AC or DC Operation EPF401 Fixtures are designed for mounting in locations that are remote from their power source*. They are offered with 6, 12, and 24-volt lamps for DC operation.
EC, E12C, EN, E12N Series 6 or 12 Volt Emergency Lighting Unit For Operation in Hazardous Areas Class I, Division 2, Groups C & D Class II, Division 2, Groups E & F Sealed Maintenance-free Lead Calcium or Nickel-Cadmium Battery Series meets requirements for operation under NEMA 1, 2, 3, 3R, 3S, 4, 4X, 12 and 13 conditions This Series of emergency lighting units are designed to meet the specific requirements of Division 2 Hazardous areas.
Exit Signs Simplicity Series 50-51 Genesis GXEM Floor Proximity Series 52-53 Genesis GX, GXE Series 54 Galaxy XL Series 55 Galaxy XLD, XLED Series 56 X3 Series 57 X4 Incandescent Series 58 X4 LED Series 59 X2 Squire Series 60 Quickie “XQ” Series 61 Quickie “QLX-MR” Series 62 Quickie II “QLXN500-SQ” Series 63 Severe™ XV Series Exit/Severe™ Nema-4X Rated Family 64-65 XT Series 66 Special Wording 67 Triad LED Replacement Lamps/LED Retrofit Kit 68 Exit Series 49
NE W YORK CI T Y APPROVED US Simplicity Series Universal Mount 6” or 8” Die-Cast Aluminum Edge-Lit LED Exit Sign Evaluated to UL 924 standard The Simplicity series combines a clean, modular design with state-of-theart technology and ease of installation. Elegantly discreet, this designer series of exit signs will compliment the most prestigious interiors while providing mounting versatility and energy efficiency. FEATURES Reliability The Simplicity Series has a five-year full warranty.
DIMENSIONS EASY INSTALLATION 3-1/4“ 4-5/8" 16-3/4“ 4-5/8 “ 5-1/4“ EXIT SURFACE END MOUNT 14 “ “SNAP” 13-7/8 “ 13-3/4 " “SNAP” SURFACE CEILING MOUNT •A quick connect plug is used to wire the LED strip to the charger and power supply. SURFACE WALL MOUNT •Torsion springs on the trim plate slide into the back box to provided a tight seal between both. •The modular design results in easy “snap in” of face panel.
US Genesis GXEM Floor Proximity Series Genesis Master with Remote Floor Proximity LED Exit Surface or Recessed Mount Evaluated to UL 924 Standard The Genesis GXEM Floor Proximity Series are premium die-cast exit signs that combine style with superior performance and durability. This series can be surface or recessed mounted at the floor level and are available as AC-only, AC-dual circuit and as a DC-remote fixture supplied by a “Master” Genesis Exit sign.
HOW TO ORDER TYPICAL APPLICATIONS SELF-POWERED MASTER WITH FLOOR-PROXIMITY UNIT Self-Powered Master 120/277 Volt Input EXIT Example Model #: GXEMBRA-N AC-ONLY MASTER WITH FLOOR-PROXIMITY UNIT 2 CIRCUIT APPLICATION AC-Only Master 120/277 Volt Input 2 Circuit Example Model #: EXIT GXMBRA-N Low Voltage Wire EXIT Floor-proximity Surface or Recessed Example Model #: BFPGXLDRS HOW TO ORDER SELF-POWERED MASTER (Unit for above door) GXEM Series B Housing Color B= Black W= White A= Brushed Aluminum R
NE W YORK CI T Y APPROVED US Genesis GX, GXE Series Die-Cast Aluminum LED Exit Sign AC, AC/DC or Self-Powered Models Evaluated to UL 924 Standard The Genesis “GX, GXE” Series LED Exit sign combines visual appeal, durability and energy efficiency in a compact, contemporary design. Self-Diagnostics standard on self powered models.
U®L Listed Galaxy XL Series Die-Cast Remote Capacity Exit Sealed Lead-Calcium or New Nickel-Metal-Hydride Battery UL Listed The Galaxy “XL” Series are self-powered LED exit signs with excess battery capacity designated to power remote emergency lights and exit signs. Ceiling Mount 8-1/4” 6-1/4” FEATURES Reliability The Galaxy “XL” Series has a five-year full warranty.
U®L Listed Galaxy XLD, XLED Series LED Die-Cast Aluminum Exit Universal Mount AC, AC/DC or Self-Powered Exit Signs UL Listed The Galaxy XLD, XLED Series exit signs save energy while providing excellent visual performance. This series offers universal mounting capabilities as well as long lasting LED performance. FEATURES Reliability The Galaxy “XLD, XLED” Series has a five-year full warranty (less batteries and lamps).
U®L Listed X3 Series Extruded Aluminum LED Exits and Combination Units Sealed Maintenance-free Lead Calcium or Nickel-Cadmium Battery UL Listed AC-Only exit signs are UL listed for use in Damp Locations The X3 Series exit signs and power packs combine versatility, energy efficiency and performance in a moderately-priced package. FEATURES Reliability The X3 Series has a three-year full warranty (less batteries and lamps).
U®L Listed X4 Incandescent Series Steel Incandescent Exit Signs and Combination Units AC Only and Self-Powered Sealed Maintenance-Free Lead Calcium and Nickel-Cadmium Batteries UL Listed AC Only signs are UL listed for use in Damp Locations The X4 Incandescent Series exit signs and power pack combination units offer a complete package of features to make installation fast and easy.
U®L Listed X4 LED Series LED Exit Signs and Combination Units AC Only and Self-Powered Sealed Maintenance-Free Lead Calcium and Nickel-Cadmium Batteries UL Listed AC Only signs are UL listed for use in Damp Locations The X4 LED Series exit signs and power pack combination units offer a complete package of features to make installation fast and easy. FEATURES Reliability The X4 LED Series has a three-year full warranty (excluding lamps and fuses).
U®L Listed X2 Squire Series Thermoplastic LED Exit and Combination Unit Sealed Maintenance-Free Lead Calcium or Nickel-Cadmium Battery UL Listed The X2 Squire Series is compact, easy to install and affordable. This series is ideally suited for commercial and institutional applications. FEATURES Reliability The X2 Squire Series has three-year full warranty (excluding batteries and lamps). Unit Data The housing is constructed of a durable thermoplastic, available in mist-white or black.
US Quickie “XQ” Series Universal Mount LED Exit Sign Thin, Sleek and Economical Sealed Maintenance-free Nickel-Cadmium Battery AC-Only, AC/DC or Self-Powered Evaluated to UL 924 Standard The Quickie is a versatile exit sign, featuring an all-in-one design that uses the same compact housing for both AC, AC/DC and Self-Powered models. FEATURES Reliability The Quickie “XQ” series has a five-year full warranty.
U®L Listed Quickie “QLX-MR” Series Quickie II – Thermoplastic LED Exit Signs AC-Only and Self-Powered Exits and Combination Units Sealed Maintenance-free Lead Calcium or Nickel Cadmium Battery Damp location listing is standard on all models UL Listed The Quickie “QLX-MR” series is a compact, all-in-one snap-together design. Easy to install and affordable, the QLX Series is ideally suited for any commercial application, especially those in which large numbers of exit signs are required.
U®L Listed Quickie II “QLXN500-SQ” Series Quickie II – Thermoplastic LED Combination Units Sealed Maintenance-free Lead Calcium battery Damp location listing is standard on all models UL Listed The Quickie II ”QLXN500-SQ” series is our combo unit with field adjustable heads to accommodate job site mounting requirements. FEATURES Reliability The Quickie II ”QLXN500-SQ” series has a three-year full warranty.
NEMA-4X U®L Listed Severe “XV” Series Exit Nema-4X Self-Powered LED Exit Sign Standard with Diagnostic/Self-Test Feature Sealed Maintenance-Free Nickel-Cadmium Battery Standard Damp Location Listing (10°C - 40°C) (50°F-104°F) UL Listed The Severe “XV” Series Exit is housed in an industrial-grade polyvinyl chloride enclosure.
DIMENSIONS 4-5/8” 3/4” 6-1/4” 9-3/16” 3-7/16” 3-7/8” 13-1/4” Double face Single face Dimensions are approximate and subject to change ORDERING FORMAT XVE Color Option, Housing/Face Blank = Black/Black BW = Black/White BA = Black/Aluminum GB = Gray/Black GW = Gray/White GA = Gray/Aluminum WB = White/Black WW = White/White WA = White/Aluminum Series XV = AC-only XVE = -1 -R -D -4X Faces -1 = Single face -2 = Double face Legend colors -R = Red -G = Green Diagnostics Blank = AC-only Housing -
U®L Listed XT Series Self-Luminous Exit Sign Non-Electric, No Wiring or Energy Required UL Listed The XT Series signs are suitable for use in hazardous, explosive, corrosive, humid or any other harsh environment. The XT Series is not dependant upon the use of electrical power, either internally or externally. FEATURES Reliability The “XT” Series exit signs shall be spark free and suitable for use in humid, corrosive or explosive environments.
Special Wording Illuminated Signage Custom-worded, illuminated signage is available using the same sturdy construction and electrical design as Lightalarms exit signage. A wide range of sign body options and colour choices are available to suit any application.
US Triad Triad LED Replacement Lamps LED Retrofit Kit • Convert high consumption incandescent and fluorescent lamps to energy efficient LED lamps. • Reduce energy consumption by up to 90% • Improve visibility and reliability • Reduce maintenance costs DIMENSIONS 1.25” 0.97” FEATURES • Quick and easy to install • Available with wide range of lamp bases for quick lamp to lamp replacement • Available in high brightness or ultra high-brightness LEDs • 120Vac 5.13” 4.70” 3.75” 3.
Fluorescent Emergency Lighting Ballasts FF-AM Series AM-L, AM-L-2 Series AM Series AM28 & AM54 Series AM30 Series 70 71 72 73 74 Fluorescent Emergency Lighting Ballasts 69
NE W YORK CI T Y APPROVED U®L Listed FF-AM Series Self-Powered Fluorescent Fixture Sealed Maintenance-free Nickel-Cadmium Battery Tamper Proof and Vandal Proof UL Listed The FF-AM Series is a tamper and vandal resistant fluorescent fixture that combines the functions of normal area lighting and emergency lighting in one fixture. FEATURES Reliability The FF-AM Series has a three-year full warranty (excluding lamps and pilot lights).
NE W YORK CI T Y APPROVED U®L Listed AM-L & AM-L-2 Series Fluorescent T-Bar Power Pack Sealed Maintenance-Free Nickel-Cadmium Battery UL Listed The AM-L & AM-L-2 Series Fluorescent T-Bar power packs are a cost-efficient solution for conversion of new or existing fluorescent fixtures into emergency lighting units. This series are ideally suited for commercial applications. FEATURES Reliability The AM-L & AM-L-2 Series has a three -year full warranty.
NE W YORK CI T Y APPROVED U®L Listed AM Series Fluorescent Power Packs Sealed Maintenance-Free Nickel-Cadmium Battery UL Listed The AM Series Fluorescent power packs are a cost-efficient solution for conversion of new or existing fluorescent fixtures into emergency lighting units. This series are ideally suited for commercial applications.
NE W YORK CI T Y APPROVED U®L Listed AM28 and AM54 Series Emergency Power Packs T5 or T8 Fluorescent Lamps Sealed Maintenance-Free Nickel-Cadmium Battery Damp Location Listed UL Listed (for factory installation or retrofit applications) The AM28 and AM54 are self-contained emergency ballasts designed for use with most T5 or T8 fluorescent lamps. They are ideal for use in linear lighting fixtures where ballast space is limited. FEATURES Reliability The AM28 & AM54 Series has a five-year full warranty.
NE W YORK CI T Y APPROVED U®L Listed AM30 Series Emergency Power Packs T8 or T12 Fluorescent Lamps Sealed Maintenance-Free Nickel-Cadmium Battery UL Listed The AM30 Series designed for use with most T5 or T8 fluorescent lamps. They are ideal for use in linear lighting fixtures where ballast space is limited. FEATURES Reliability The AM30 Series has a five-year full warranty.
Central Systems AC Central Systems 76 Central Systems 75
AC Central Systems Lightalarms central systems are battery based power systems designed to operate loads in the event of a utility failure or brownout condition. All systems are self-contained and fully automatic.
Remote Fixtures ICR-2 and Phantom™ Remote Series Saf-T-Ray™, ELF650 Severe™ Series Decorative Surface Remote Series Surface Mounted Remote Series Recessed Mounted Remote Series Weatherproof or Harsh Environment Remote Series 78 79 80-81 82-83 84 85 Remote Fixtures 77
U®L Listed ICR-2 Remote Series FEATURES The ICR-2 Series remote emergency lighting fixture features a contemporary, elegant design in a compact thermoplastic housing. Attractive and versatile, the ICR-2 Series fixtures can be mounted in any orientation on walls and ceilings and are ideally suited for commercial or architectural applications requiring versatility and ease of installation.A CCESSO ORDERING FORMAT ICR 5 -2 Series ICR= remote fixture Lamps Wattage 5= 5.4 watts 7= 7.
U®L NEMA-3R Saf-T-Ray Series TM HOUSING The premium die-cast aluminum housing is designed to withstand extreme weather conditions and yet provide aesthetically pleasing looks with a compact footprint. Ideal for damp, wet and cold location specifications, Saf-T-Ray provides a fully gasketed cover with the option of vandal-resistant screws.
U®L Decorative Surface Remote Series The Decorative Series emergency fixtures have been specially built to meet the needs of contemporary decor professionals. Constructed of a highlyresistant powder-coated die cast aluminum, these fixtures are available with 1, 2 and 3 head configurations, as well as a complete selection of attractive styles and shades. Safety and Security have never looked so good.
U®L Decorative Recessed Remote Series The Recessed Decorative Remote series will create an entirely new design vocabulary of emergency lighting function and form. Constructed of a highly-resistant, powder-coated die cast aluminum, these fixtures are available in a selection of attractive styles and finishes.
Surface Mounted Remote Series ELF2, ELF2D U®L DESCRIPTION: Single or double PAR18 size indoor lighting head with fully adjustable swivel; all thermoplastic construction.
ELF623, ELF623D U®L DESCRIPTION: Single adjustable decorative lighting head - all thermoplastic construction. FINISH: Mist White (-M), Black (-B) MOUNTING: Direct to 4" octagonal or single-gang box round mounting canopy standard.
Recessed Mounted Remote Series ELF604 U®L DESCRIPTION: Recessed rectangular fixture with diffusion lens and welded steel housing. FINISH: White baked enamel MOUNTING: Surface (wall or ceiling). Knockouts provided on 2 sides and back. Adjustable mounting clips provided.
Weatherproof or Harsh Environment Remote Series ELF647C ELF647, ELF647D U®L DESCRIPTION: NEMA CLASSIFIED. Single, PAR36 size lighting head with fully adjustable swivel, all thermoplastic construction, and stainless steel screws. Standard with round aluminum plate for mounting directly to 4” outlet box. Fixtures are rain and dust-tight as well as corrosion resistant.
Notes 86 Remote Fixtures
Accessories and General Information Wire Guards Unit Accessories Mounting Plate Series Lamp Data Wire Size Guide National Electrical Code Life Safety Code Limited Warranty 88-89 90 91 92-93 94 95-96 97-99 100 Accessories and General Information 87
Wire Guard CATALOG NUMBER WG1 CATALOG NUMBER WG5 Application Series DM & DS (Top Mounted Heads); SQ & SQ-D (Semi Recessed); ELF644 (Surface Mount); MG Series; QLX500-MR (exit only-Wall Mount) 12” 14” 5” 13-3/4” 16” Application Series XLD (AC Only ceiling & end mount); XQ (ceiling mount); X2; X3 (ceiling & end mount) XT (ceiling mount); X4 (Ceiling 14” or End Mount); QLXN500-MR (Exit only-Ceiling or End Mount) 5-1/2” CATALOG NUMBER WG2 CATALOG NUMBER WG6 Application Series PG; P12G; PN; P12N (A C
CATALOG NUMBER WG9 CATALOG NUMBER WG13 Application Series ELF2; 2D (Double Head); ELF622; 622D; 622T & 645; 645D; 645T & 648; 648D 9” (double head) Application Series IC-2; ICR-2 (Remote) XLD (Self-powered, Wall Mount); LCA-2MR 8-1/4” 13” 11-1/4 6-5/8” 14” 10-1/4” 15” CATALOG NUMBER WG10 CATALOG NUMBER WG14 Application Series DM & DS (Side Mounted Heads, Par 18); LCA-SQ; MG; QLXN500R-SQ (Heads in any Position) Application Series XLD (Self-powered, Ceiling Mount) 12” 20” 9-5/8 11-7/8” 12” 15
Unit Accessories CATALOG NUMBER VRC OR VRC-4X (NEMA-4X) MOUNTING PLATFORMS Application • DM3, DM6, DM7 Series with top mounted heads • SQ, SQ-D Series all mountings • X4, X2 or X3 Series LED, Incandescent (wall mounted) AC and AC/DC or Self-Powered exit with no mounted heads • XQ Series LED (wall mounted) AC and AC/DC or Self-Powered • XLD, XLED Series LED, (wall mounted) 151/8” • 14 gauge steel • Corrosion resistant undercoat • Oven baked finish • 1/2" retaining lip on three sides • Keyhole slots for
Mounting Plate Series Specify mounting plate designation as a suffix to fixture type model number. Plates ordered separately, specify plate designation and fixture type. 230.1238 & 230.1239 • Single, double or triple round • Thermoplastic construction • Mounting plates shipped with two hole plugs • Mist or black finish only • Mount direct to 4" octagonal box Dimensions: 5" diameter - slotted mounting holes 3 to 3 9/16" mounting center Off-White - 230.1238 Black - 230.1239 Off-White Hole Plug - 230.
Lamp Data HOW TO USE THIS CHART Use the lamp chart when ordering remote lighting fixtures, non-standard For Replacement Lamps lamps or replacement lamps. When ordering non-standard lamps, or Order by replacement number. lamps for remote fixtures, be sure to select lamps from those listed under For Remote Fixtures the battery voltage of the unit or system powering the lamp. Include complete lamp suffix as suffix to model number.
PAR36 SEALED BEAM LAMPS - (Available by Special Order) Unit/System Battery Voltage SEALED BEAM HALOGEN Watts HALOGEN 6 6 6 6 6 HALOGEN 8 12 12 12 37 12 50 12 INCANDESCENT 8 6 12 6 18 6 25 6 30 6 INCANDESCENT 12 12 18 12 25 12 30 12 35 12 25 12 25 12 50 12 50 12 12 VOLT SEALED BEAM INCANDESCENT PAR36 6 VOLT 12 VOLT Unit/System Battery Voltage HALOGEN MR16 Lamp Suffix/ Lamp Number Replacement Number Center Beam Candle Power (CP) H7556 H7551 H7552 H7553 H7554 550.0022 550.0036 550.0037 550.
Wire Size Guide Determining Wire Size The following information is provided to assist in designing proper emergency lighting systems effectively and economically by using the smallest permissible wire size for load circuits. When remote lighting fixtures and/or exit signs are connected to emergency lighting units, circuit runs must be of sufficient size to maintain a proper operating voltage to all lamps. The National Electrical Code limits voltage to drop to a maximum of 5% of nominal.
National Electrical Code ARTICLE 700—EMERGENCY SYSTEMS A. General 700-1. Scope. The provisions of this article apply to the electrical safety of the installation, operation, and maintenance of emergency systems consisting of circuits and equipment intended to supply, distribute, and control electricity for illumination or power, or both, to required facilities when the normal electrical supply or system is interrupted.
National Electrical Code (cont’d) FPN No. 1: For definition of occupancy class, see Section 4.1 of Life Safety Code, NFPA 101-2000. FPN No. 2: Assignment of degree of reliability of the recognized emergency supply system depends on the careful evaluation of the variables at each particular installation. (a) Storage Battery.
Life Safety Code 7.8 Illumination of Means of Egress. 7.8.1 General. 7.8.1.1* Illumination of means of egress shall be provided in accordance with Section 7.8 for every building and structure where required in Chapter 11 through Chapter 42. For the purposes of this requirement, exit access shall include only designated stairs, aisles, corridors, ramps, escalators, and passageways leading to an exit.
Life Safety Code (cont’d) 7.9.3 Periodic Testing of Emergency Lighting Equipment. 7.10.1.5 Exit Access. 7.9.3.1 Required emergency lighting systems shall be tested in accordance with one of the three options offered by 7.9.3.1.1, 7.9.3.1.2, or 7.9.3.1.3. 7.10.1.5.1 Access to exits shall be marked by approved, readily visible signs in all cases where the exit or way to reach the exit is not readily apparent to the occupants. 7.9.3.1.
Life Safety Code (cont’d) 7.10.5 Illumination of Signs. 7.10.7 Internally Illuminated Signs. 7.10.5.1* General. Every sign required by 7.10.1.2, 7.10.1.5, or 7.10.8.1,other than where operations or processes require low lighting levels, shall be suitably illuminated by a reliable light source. Externally and internally illuminated signs shall be legible in both the normal end emergency lighting mode. 7.10.7.1 Listing.
Limited Warranty 1.0 Lightalarms 6, 12 and 24 volt Emergency Lighting Unit Equipment (excluding lamps and fuses) are fully warranted to be free of defects in material and workmanship under normal use for a period of three years from date of installation (see Paragraph 2.0). 1.1 Lightalarms 6, 12 and 24 volt Unit Equipment Batteries are warranted as follows (Warrant below includes the 3-year full warranty on entire unit as called out in Paragraph 1.0). 1.
