Specifications

Unit Accessories
Accessories and General Information90
CATALOG NUMBER VRC OR VRC-4X
(
NEMA-4X
)
Application
• DM3, DM6, DM7 Series with top mounted heads
• SQ, SQ-D Series all mountings
• X4, X2 or X3 Series LED, Incandescent (wall mounted)
AC and AC/DC or Self-Powered exit with no mounted heads
• XQ Series LED (wall mounted) AC and AC/DC or Self-Powered
• XLD, XLED Series LED, (wall mounted)
CATALOG NUMBER CPS OR CPS-4X
(
NEMA-4X
)
Application
• MG Series (small cabinet) top or front mounted heads
• DM3, DM6, DM7 Series with top or side mounted heads
REMOTE TEST SWITCH
Make testing your ceiling mounted equipment easier with the remote test
switch. Compatible with 120 or 277Vac circuits, the remote test switch will
interrupt the line voltage to your equipment by means of a momentary
push button switch. AC on/Charge status indicator lamp assures that power
is going to your emergency lighting.
How To Order
Remote Test Switch………PSW
2
ff
”
3
jj
”
4
dd
”
2-7/8”
1/4”
1/2”
A
D
E
F
G
1/2”
B
C
MP-PQB
MP-A
MP-PQA
MP12
Model
Dimensions (inches)
abcdefg
MP-PQB (Mist) 17 7-3/4 12-1/4 16 3/4 5/16 5/8
MP-A (Gray) 17 7-3/4 12-1/4 16 3/4 5/16 5/8
MP-PQA (Mist) 16-3/8 5-3/4 10-1/4 12-1/2 7/8 3/16 7/16
MP12 27-1/2 7-3/4 12-1/4 16 1-5/8 5/32 5/16
Dimensions are approximate and subject to change
Model
Dimensions (inches)
abcd
MB-A 10 7-3/4 2-3/16 7
MB-B 14-1/4 11-3/4 2-3/16 12-5/8
Dimensions are approximate and subject to change
MOUNTING PLATFORMS
• 14 gauge steel
• Corrosion resistant undercoat
• Oven baked finish
• 1/2" retaining lip on three sides
• Keyhole slots for easy
mounting
MOUNTING BRACKETS
• 16 gauge steel
• Corrosion resistant undercoat
• Oven baked finish
• Supplied with rubber stand-offs
for unit and machine screws to
secure unit to bracket
151/8”
151/8”
87/8”51/4”
6”
1/4”
7-3/4”
22”
14-7/8”
13-7/8”
21”