SDS

ManualsBrandsMr. Metal ManualsCleaning8 oz. Brass and Copper Liquid Polish

SAFETY DATA SHEET

1. IDENTIFICATION OF SUBSTANCE

1.1 PRODUCT DESCRIPTION: Mr. Metal Polish (8-oz)

1.2 PRODUCT CODE: 707284

1.3 COMPANY INFO: WEST DRIVE, LLC

1045 W. GLEN OAKS LANE, SUITE 202

MEQUON, WI 53092

PHONE: 800-790-8216

2. HAZARDS IDENTIFICATION / HEALTH INFORMATION

2.1 Classification of the Substance or Mixture:

Acute Toxicity, Oral (Category 4)

Acute Toxicity, Inhalation (Category 4)

Acute Toxicity, Dermal (Category 4)

2.2 Label Elements [Signal Word]: Warning

Symbols: GHS08

Hazard Statements: H302 – Harmful if swallowed.

H312 – Harmful in contact with skin.

H332 – Harmful if inhaled.

Precautionary Statements

Prevention: P264: Wash thoroughly after handling.

P261: Avoid breathing fumes.

P270: Do not eat, drink or smoke when using this product.

P271: Use only outdoors or in well-ventilated area.

P280: Wear protective gloves/protective clothing/eye protection/face protection.

Response: P301 & P312: If swallowed, or if you feel unwell, immediately call a poison center or

doctor/physician.

P330: If ingested, rinse mouth.

P302 & P352: If on skin, wash with plenty of soap and water.

P304 & P340: If inhaled, remove victim to fresh air and keep at rest in a position

comfortable for breathing.

P363: Wash contaminated clothing before reuse.

Disposal: P501 – Dispose of contents/container in accordance with appropriate federal, state and

local regulations.

Other Hazards: Contact with eyes may cause irritation.

Summary of content (5 pages)

PAGE 1
SAFETY DATA SHEET 1. IDENTIFICATION OF SUBSTANCE 1.1 PRODUCT DESCRIPTION: Mr. Metal Polish (8-oz) 1.2 PRODUCT CODE: 707284 1.3 COMPANY INFO: WEST DRIVE, LLC 1045 W. GLEN OAKS LANE, SUITE 202 MEQUON, WI 53092 PHONE: 800-790-8216 2. HAZARDS IDENTIFICATION / HEALTH INFORMATION 2.1 Classification of the Substance or Mixture: Acute Toxicity, Oral (Category 4) Acute Toxicity, Inhalation (Category 4) Acute Toxicity, Dermal (Category 4) 2.
PAGE 2
3. COMPOSITION AND INFORMATION ON INGREDIENTS Hazardous components within the meaning Of EEC directive 67/548 and Hazard Classifications EC1272/2008 Hazard Code H314 H400 H332 H312 H302 H319 H315 H312 H302 H302 H315 H318 H317 H400 CAS # Concentration AQUEOUS AMMONIA 1336-21-6 3.65% 2-BUTOXYETHANOL 111-76-2 3.00% Skin Corr. 1B Aquatic Acute 1 Acute Tox. 4 Eye Irrit. 2 Skin Irrit.2 OXALIC ACID 144-62-7 0.30% Acute Tox. 4 1,2-BENZISOTHIAZOL-3(2H)-ONE (preservative) 2634-33-5 .
PAGE 3
5. FIRE FIGHTING MEASURES 5.1 Extinguishing Agents: Foam, CO2, Dry Chemical 5.2 Advice: Normal fire fighting procedures may be used. 5.3 Unusual Fire Hazards: Container may melt and leak in heat of fire. Spills may be slippery. 6. 6.1 7. ACCIDENTAL RELEASE MEASURES Sweep or scrape up and containerize. Use clay absorbent if desired. Rinse area afterwards with copious amounts of soap and water. Affected areas may be slippery. HANDLING AND STORAGE 7.1 Handling: Do not ingest.
PAGE 4
11. TOXICOLOGICAL INFORMATION 11.1 Toxicity for ingestion: Call a physician or Poison Control Center. Product is a diluted mixture of ammonia, glycol ethers and clays. 11.2 Toxicity of inhalation: Not expected to be a problem under normal use conditions, only use product in a wellventilated area. 11.3 Irritation effects from skin contact: May be irritating to skin. If irritation occurs, get medical attention. 11.
PAGE 5
16. OTHER INFORMATION HMIS RATINGS Health: 2 Flammability: 1 Reactivity: 1 Hazardous Material Identification System hazard ratings are designed to inform employees of chemical hazards in the workplace. These ratings are based on the inherent properties of the material under expected conditions of normal use and are not intended for use in emergency situations.