Operation Manual

1. Outdoor IP camera unit

2. Antenna connection

3. Network connection

4. Power connection

5. Audio out connection

6. Audio in connection

7. Terminal connection for alarm

Connections 1 & 2 = OUTPUT / 3 & 4 =

INPUT

8. Reset button

9. Antenna

10. Mounting bracket + screws

11. Network cable

12. Power adapter

13. Quick Reference Guide

2. GETTING STARTED

2.1. Connecting the device

A. INDOOR IP CAMERA

• Take the mrSafe outdoor IP camera out of the box. Attach the wifi antenna (8).

• Connect the power charger (10).

• Plug the network cable (9) into the cable jack and connect the other end of the cable into your router. The

network light will turn on.

NOTE: If there is no light, please unplug the power cable and the network cable. Check if your router is OK and re-

plug both cables.

B. OUTDOOR IP CAMERA

The mrSafe Outdoor IP camera has many connections. When the mrSafe camera can be installed within the range

of your Internet modem, you only need to provide a power supply. We recommend to first configure the camera

close to your computer, and do a test close to the location where it was installed. If the wifi will continue stable

for one day, the wifi range seems to be sufficient.