Operation Manual

When the image appears, the camera is ready to operate.
If the image is not completely clear or sharp, you can turn the lens focusing ring till the image appears sharp.
If you want to control the camera and change the viewing angle you have to double click on the image. The image will
reappear with a white edge. Now you can control the camera with the control panel (for further information see
chapter “7.2. Control Panel”).
5.2. LAN Camera settings
You can change the settings of each camera by right clicking on the camera you want to adjust.
5.2.1. Setting options
5.2.1.1. Change the device alias
You can change the camera ID into another name. Type a new name in the box and press “OK”. The camera will now
have another name instead of its ID.
10