Operation Manual

Choose the start time when the camera must start recording and choose the end time when the camera must stop
recording. Press “Add” to save the settings, the previous menu will reappear. Press “Apply” to confirm the video
schedule.
NOTE:
1. Your computer must be turned ON, the PC software must be turned ON and the camera must be active in the
PC software while recording images with the video schedule. The images will be saved ONLY on your computer
and will ONLY be viewable on your computer.
2. Synchronization time zone: to get an automatic synchronization of the time zone, right-click in the white part
of the screen and choose “Refresh”.
5.2.1.4. Restore to factory default settings
To delete all previous settings and passwords of the camera select “Restore to factory default settings”.
A pop-up window will appear to ask if you are sure to restore the default settings. Press “Yes” to delete all settings.
5.2.1.5. Device restart
You can restart the IP camera by pressing on “Device restart”. The camera will now restart. This can take a few minutes.
5.2.1.6. E-mail alerts
The IP camera can detect motion. This function does not work by using an infrared receiver, but by digitally “looking”
at the image through the camera. When there are too much changes in the image, the motion alarm will be activated.
12