Operation Manual

The sensitivity is adjustable. For outdoor cameras, please note that leaves moving in the wind and rain are also
detected as “motion”. In case of an alarm, the camera can send an alert to the PC (if the software is activated), send
an email, or start recording on the SD card (if available).
Tick the check boxes for “Motion Detection” and "Ignore SD card failure". In the "Receiver E-mail" field, you should
enter the email address that needs to receive the alerts. In the "Sender E-mail" field you should enter a hotmail or
gmail address. Enter the corresponding name and password for the fields “SMTP user name” and “SMTP Password”.
Note that “TLS” has to be selected for “Data encryption” and “587” has to be entered for “SMTP port”.
If you click on “Test”, a test e-mail will be sent. If the test e-mail does not arrive, please also check the Junk e-mail!
The motion detection sensitivity is disabled by default. To receive real motion detection alerts, you need to look at the
camera in the PC program, right click the screen and choose "Camera settings". In the field “Alarm Management” set
the "Alarm sensitivity", for example to "Middle" and click "Apply".
5.3. Group Management
In the LAN list, right click the blank space. Following pop-up menu will appear.
You can make different groups of cameras in the LAN list. Click “Create a group”.
13