Operation Manual

The pop-up window above will appear. Enter a username, password an e-mail address. Press “Register” to confirm
your registration.
For use over the Internet (WAN), you will be asked to log in. There are 2 possibilities to login.
1. You can login per camera. Find the login details at the bottom of the IP Camera. You need to enter the user name
(CAM ID) and Password (Login Password). Now you can only see the camera you have logged into.
2. To see a list of all your cameras, you can log in with the username and password you have created yourself. Right
click in the blank space and choose “Add device”. You can add all your cameras by entering each camera ID and
access code (on the bottom of the camera). Now you can view all you cameras by just entering your own
username and password and you don’t have to memorize all the camera ID’s and access codes anymore. If you
forgot your password press “Forgot password?”, enter your information and an e-mail with a new password will
be send to your e-mail address.
To logout press “Logout” in the upper right corner.
All the cameras that are in the wide area network (WAN) will be displayed in the WAN list. The color of the camera
icon next to the name of the camera (CAM ID) will change depending on the status of the camera:
• Gray: Camera not available (offline)
• Blue: Camera available (online)
• Red: Camera is activated and viewed
6.2. WAN Camera browsing
When you are logged in, double click on the camera you want to see. The program is now going to make contact with
your camera. This can take a few seconds.
15