Operation Manual

6.3.1 Setting options

6.3.1.1. Add device

You can rename the camera you want to add by entering a new name in the “Device alias” box. Enter the device ID

and access code (at the bottom of the IP Camera) and press “OK”. The new camera will now be shown in the WAN list.

6.3.1.2. Change ACCESS CODE

To change the access code, enter the new code in the “New access code” box and verify the new code by entering

the same code in the box below. Press “OK” to save the setting.

NOTE: The next time the system asks for the access code, you have to enter the new code! To delete the new code,

restore the default settings and the original access code will be applied again.

6.3.1.3. Change the device alias