Operation Manual

8.2. Device management
To make changes to your device go to the upper left corner and press the button.
• Add device: you can add an extra IP camera
• Change password: you can change your login password
What to do if you have changed the password of your camera , but you have forgotten the new password?
A. In case you have NOT registered an account on the server (see “Register” menu): If the IP camera is
ON and connected via a network cable, you should press the reset button on one of the cables of the
device at least 10 seconds using for example a tooth pick. The camera makes a clicking sound and
will now restart. The password of the camera and the login server is now equal to the information
on the sticker on the bottom of the camera. The camera should be completely reset.
B. In case the camera has been added to an account (name + password) that you have created on the
server using the “Register” menu: Click in the software menu on “Forgot password”. Enter your name
and e-mail address. The server will then send you an email with a new password.
• Change access code: you can change the access code of the camera (sticker on the bottom). For more
information go to chapter “6.3.1.2 Change access code”.
• Change device alias: you can change the name of you camera. For more information go to chapter “6.3.1.3
Change device alias”.
29