Operation Manual

9. ALARM SETTINGS

9.1. Alarm management

You can set alarms that will be activated by movements (motion) in front of the camera.

Click on .

The alarm management is used to set up the sensitivity of the alarm. That means that if you choose for a number

between 0 and 5 the alarm will have a low sensitivity and will only go off when there is an obvious movement in front

of the camera. When you choose a number between 5 and 10 the alarm will have a high sensitivity and will go off

when there is a small movement in front of the camera.

NOTE: we recommend keeping the sensitivity of your alarm low to prevent that the alarm goes off every 10 seconds.

9.2. Local Alarm Alerts

In the “Settings” menu, go to the “Alarm” tab:

• Alarm notification time: you can choose the amount of seconds the program will give an alarm

• Alarm audio Notification: you can select a music file from your computer to use as the alarm indication.

• Alarm recording time: You can choose the amount of seconds the program will record an alarm in the PC

software.

• Alarm capture: You can choose the amount of seconds the program will capture pictures when the alarm goes

off.

Press “OK” to save the settings.