Operation Manual

1. Outdoor IP camera

8. Reset button

2. Antenna connection

9. Antenna

3. Network connection

10. Mounting bracket + screws

4. Power connection

11. Network cable

5. Audio out connection

12. Power adapter

6. Audio in connection

13. Quick Reference Guide

7. Terminal connection for alarm

Connections 1 & 2 = OUTPUT / 3 & 4 =

2. GETTING STARTED

2.1. Connecting the device

A. INDOOR IP CAMERA

• Take the mrSafe indoor IP camera out of the box. Attach the Wifi antenna (8).

• Plug the power cable into the power jack (10).

• Plug the network cable (9) into the cable jack and connect the other end of the cable into your router. The

network light will turn on.

• NOTE: If there is no light, please unplug the power and network cable, and check if your router is OK.

Reconnect both cables.

B. OUTDOOR IP CAMERA

• The mrSafe Outdoor IP camera has many connections. When the mrSafe camera can be installed within the

range of your Internet modem, you only need to provide a power supply. We recommend to first configure

the camera close to your computer, and do a test close to the location where it was installed. If the Wifi will

continue stable for one day, the Wifi range seems to be sufficient.