Controls Specification Sheet

mr
.
steam
®
T E C H N I C A L S P E C I F I C AT I O N S
TS0035 Rev 7.14
mr
.
steam
®
Sussman-Automatic Corp® [e-mail] www.mrsteam.com
43-20 34th Street, Long Island City, NY 11101 tel: 1 800 76 STEAM fax: [phone]
9410 S. La Cienega Blvd. Inglewood CA 90301 tel: 1 800 72 STEAM fax: [phone]
iTempoPlus
®
Controls
iTempoPlus controls flush mount in the steam/shower enclosure through a
2
5
⁄8” wide x 3
7
⁄8” high hole. iTempo controls can also be surface mounted.
iTempoPlus Controls Feature:
• Solid brass decorative cover
with choice of square or round
styles in designer finishes
• Digital display
• Programmable temperature
• AromaSteam Steamhead in
matching finish and shape
• Compatibility with SteamLinx
The iTempoPlus controls are designed to be installed inside or outside
the steam room but is primarily installed inside the steam room. If the
control is installed inside the steam room the control must be located:
• 4-5 feet above the floor
• in a location representative of the desired steam bathing
temperatures. Do not locate the control above or near the
Steamhead or direct steam emissions.
• on a vertical wall
The control cable length is 30 feet. Insure that the control and/or
steam generator are located accordingly.
An optional 60 ft. cable is available if required, PN 103990-60.
If the control is installed outside the steam room a Remote Temperature
Probe Part Number MSTS must be installed inside the steam room.
2
1
/
2
”
4
1
/
2
”
1
/
4
”
3
/
8
”
3
/
4
”
1”
5”
5”
3
3
/
4
”
12” long
pigtail
• Soft touch keypad
• Low voltage operation
• Programmable steam bath
duration
• Clock
• ON/OFF control for AromaSteam
and Chroma72
• Two programmable presets
BOX CONTENTS:
• iTempoPlus • Tube of Silicone Sealant
• Steamhead • Owner’s Manual
• Control Cable (30 ft.)
Dimensionals for
the round and
square controls:
FOR ILLUSTRATIVE PURPOSES ONLY. IMPORTANT NOTE: FOR SAFE AND TROU-
BLE FREE INSTALLATION visit mrsteam.com before installation to download the Installa-
tion, Operation and Maintenance Manual or refer to the manual provided with the unit.
MODEL SHAPE FINISH PROJECT INFORMATION
MS iTempoPlus


RD Round


SQ Square
Location:
Architect:
Engineer:
Contractor:
Submitted By:
Date:
Notes:


BB - Brushed Bronze


BN - Brushed Nickel


ORB - Oil Rubbed Bronze


PB - Polished Brass


PC - Polished Chrome


PN - Polished Nickel


SB - Satin Brass


BK - Black Fascia


WH - White Fascia


RAW - Custom Plating