Installation Guide

ManualsBrandsMr Steam ManualsAccessoriesMr Steam AirTempo Square Flush Mount Kit

steam

Installation Instructions

________________________________________________________________________________________________

Before Installing

Carefully inspect the control and packaging for shipping damage. In the event of

shipping damage, please contact the carrier for claim information. Our customer

service department can assist you with any missing or damaged parts.

To avoid unintentional steambath operation, do not locate the

control where other controls, accessories, shower heads, valves, body sprays

or similar within the shower could cause confusion or interfere with the MrSteam

control’s intended use and function.

Do not use any AirTempo

, iSteam

, iTempoPlus

, iTempo

, HomeWizard

iGenie

controls without reading and understanding the respective Installation

and Operation Manual and MrSteam steam generator Installation and Operation

Manual. Failure to read and understand these instructions may result in an

inoperative or hazardous installation.

A peel and stick warning sticker is provided in the MrSteam steam

generator Installation, Operation and Maintenance Manual. This manual is pro-

vided with every steam generator. The warning sticker must be read and perma-

nently afxed in a conspicuous location near the steam room. Failure to read and

afx this warning sticker in a conspicuous location may result in serious injury or

death. Please call MrSteam at 800 767-8326 for a free replacement or if you have

any questions regarding the warning sticker.

Install the AirTempo, iSteam, iTempo or iTempoPlus controls according to installa-

tion instructions. Failure to install according to instructions will result in an inopera-

tive control or hazardous overheating or inadequate heating of the steam room. If

an AirTempo, iSteam, iTempo or iTempoPlus control is installed outside the steam

CAUTION

room a Remote Temperature Probe (PN MSTS) must be installed inside the steam

room per instructions for the Remote Temperature Probe. Failure to install according to

instructions will result in an inoperative control and overheating of the steam room.

Do not route AirTempo, iSteam, iTempoPlus, iTempo, Home Wizard or

iGenie control wiring inside conduit together with power lines or close to hot water or

steam piping. Doing so may result in an inoperative or hazardous installation.

Do not alter or modify any MrSteam product. Doing so may result in an

inoperative or hazardous installation and will void the warranty.

IMPORTANT NOTES:

• Turn power to the steam generator OFF before connecting the control to the

generator. Failure to turn the power off will result in an inoperable control.

• Do not operate AirTempo, iTempoPlus, iTempo, Home Wizard or iGenie controls with

anything other than a MrSteam eTempo compatible steam generator. MrSteam resi-

dential steam generators with serial numbers lower than 900000, or any other brand

of steam generator are not to be operated with AirTempo, iTempoPlus, iTempo,

Home Wizard or iGenie controls. Doing so may result in an inoperative installation.

• This document contains important safety, operation and maintenance information.

Leave this document with the homeowner. Do not discard this document.

• Discontinue use of the steam generator or control if the steam generator is

damaged or otherwise not functioning properly. Doing so may result in an inopera-

tive or hazardous installation.

• All drawings are for illustrative purposes only.

WARNING