Condensation Pan Specification Sheet

TS0012 REV 7.17

steam

Sussman-Automatic Corp

hello@mrsteam.com www.mrsteam.com

43-20 34th Street, Long Island City, NY 11101 TEL: 1 800 76 STEAM FAX: 718 472 3256

9410 S. La Cienega Blvd. Inglewood CA 90301 TEL: 1 800 72 STEAM FAX: 310 216 2944

steam

Technical Specifications

Condensation Pan MS 103867

9”

1.5”

25”

MODEL PROJECT INFORMATION

MS 103867

Notes:

Location:

Architect:

Engineer:

Contractor:

Submitted By:

Date:

FOR ILLUSTRATIVE PURPOSES ONLY. IMPORTANT NOTE: FOR SAFE AND TROUBLE FREE INSTALLATION

visit mrsteam.com before installation to download the Installation, Operation and Maintenance Manual or refer to

the manual provided with the unit.

MrSteam strongly recommends the

use of a condensation pan in the

unlikely event of a plumbing leak.

Locate the condensation pan on a

solid level surface and place the

steam generator inside the

condensation pan. Insure the steam

generator is level.

All plumbing shall be performed by a

qualified licensed plumber and in

accordance with applicable national

and local codes. Check local

plumbing code for receptor, trap and

vent requirements. Condensation pan

drains by gravity.

The condensation pan is equipped

with an integral

⁄4" NPT fitting.

PAGE 1
mr.steam ® Technical Specifications Condensation Pan MS 103867 MrSteam strongly recommends the use of a condensation pan in the unlikely event of a plumbing leak. Locate the condensation pan on a solid level surface and place the steam generator inside the condensation pan. Insure the steam generator is level. All plumbing shall be performed by a qualified licensed plumber and in accordance with applicable national and local codes. Check local plumbing code for receptor, trap and vent requirements.