Installation Guide

mr
.
steam
®
Installation & Operating Instructions
______________________________________________________________
12
The iTempo Control features programmable digi-
tal temperature control, a fixed (60) minute dura-
tion, ON/OFF and PAUSE. The control can be set
at a temperature range from 80˚
f up to 120˚f
Set the steam bathing tempera-
ture according to personal preference, however
it is highly recommended to begin steam bathing
at a low temperature setting for a very short du-
ration to gauge comfort and safety levels.
ON/OFF Diagram 1
Press the ON/OFF key to start or stop the ow
of steam. Steam will begin to ow a few minutes
after the control is turned ON. The duration re-
quired for the steam room to reach steam bath-
ing temperatures depends on the steam room
construction and steam generator specifications.
Steam may continue to ow for a short time after
the control is turned OFF.
PAUSE FEATURE Diagram 2
If a pause in steam ow is desired press the
PAUSE key. The display will ash while the con-
trol is in the PAUSE mode. The timer will con-
tinue to countdown while in the PAUSE mode.
Steam may continue to ow for a short time after
pause is pressed.
DIAGRAM 1
DIAGRAM 2
iTempo
™
Operating Instructions
WARNING
!
Drawings for Illustrative Purposes Only.